EXEDY Corporation of Japan (formerly known as Daikin Manufacturing Company) is one of the largest independent OEM suppliers. We supply all of the major Japanese vehicle manufacture’s as well as Ford and GM in the US. We are also the leading manufacturer of racing clutches in Japan and supply all six factory vehicle manufacturer’s race teams. Unlike our competitors, our clutches are NOT rebuilt OE, or modified stock clutches.
Terms and Conditions................................................................4 Installation Warning...................................................................5 Choosing the Correct Clutch....................................................6 Stage 1 - Organic single plate clutch....................................11 Stage 2 - Cerametallic single plate clutch............................12 Flywheels...................................................................................
1. All orders accepted by, and goods/products supplied by, EXEDY GLOBALPARTS CORPORATION, hereafter referred to as the Company, are subject to the following Terms and Conditions of Sale. Any exceptions and/or variations must be specifically agreed to in writing by both parties on sports and performance clutch products, warranties offered by the company on standard clutch products, do not apply to sports and performance clutch products. 2.
Claim Warranty Procedures 7. Any goods/product deemed by the customer to be faulty must be accompanied with a completed EXEDY Globalparts Corporation Warranty Claim Form, then the merchandise should be sent to the company freight prepaid or given to a company representative. An RGA may be obtained by phoning our Sales office (an RGA will be given at our discretion). Additional claim forms may be obtained by phoning a customer service representative. 7a.
1. What vehicle does the customer have? You will want to know the following. a. Manufactures exact model and model year. b. Engine size and engine code. c. If they have altered the vehicle by doing a engine swap or a transmission swap. d. If they have updated or back dated any of the engine and/or transmission components. e. Good to know information if at all possible 1. Input shaft size (measure the outer most diameter of the input shaft spline) 2. Disc size outer diameter 3. Vehicle chassis code 2.
clutches are not going to last longer than that of a OEM clutch even if the vehicle is stock as that is not the purpose of a sports/racing clutch. 3. What type of driving is the customer going to be doing? a. Street driving b. Street / Strip / Weekend racer c. Dedicated race car 4. Now that we know the vehicle model, torque output and type of driving the vehicle is being used for we can give the customer a good recommendation on clutch type (stage). a.
d. Exedy Stage 3, 4 Carbon** disc with sprung hub center section is a great choice for the “dedicated race car” who wants a very smooth engaging clutch with little to no driveline vibrations. The carbon disc is a very lightweight resulting in extremely quick shifts. e. Exedy Stage 3, 4, 5 Carbon** disc with solid hub center section is a great choice for the “dedicated race car” who wants a very smooth engaging clutch that is very lightweight for extremely quick shifts.
d. Burst tested and SFI approved. Rated to 10,000+RPM. e. Remove the OEM dual mass flywheels. All Exedy lightweight flywheels are made from a one piece forged chromoly steel which utilize a nitrate hardening process, unique cooling ducts and distribute the weight evenly to allow for better drivability on the street. 6. How to set-up and what to expect from an Exedy sport/racing product. a. Break in period should be that of 500 miles of city type driving, double the break in period for highway driving.
SFI CERTIFICATION SFI Foundation Inc. sets special specifications in automotive parts to protect both the driver and spectator. Many racing organizations and tracks now require SFI specifications for different classes and parts used. In general, as cars produce more power and go faster, these specifications become more and more strict.
Ultra Fiber Disc This advanced facing material provides the high heat resistance essential for motorsports. It was developed by reviewing both the copper wire ratio and the composition of the high strength fiber. The Ultra Fiber Disc maintains the superior halfengagement feeling specific to the Organic material. With improved high heat resistance, it provides the functionality essential for street performance and mild racing applications.
EXEDY cerametallic clutches are designed to handle the abuse of high power modified engines. Our cerametallic friction material can handle much more abuse than stock type disc assemblies without slipping and fading. All EXEDY Stage 2 cerametallic clutch discs have sprung center dampers to reduce the impact and shock loads transmitted through the drivetrain. We offer two types of cerametallic discs, “thick” and “thin.
Lightweight One Piece Chromoly EXEDY flywheels combine low weight, low inertia and high thermal capacity. They are designed for lightly tuned racing cars for drag racing, autocross and rally events, as well as street usage. They are made from solid one-piece billet chromoly steel or chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance the airflow which improves the cooling of the clutch.
The Hyper Single Clutch is engineered to optimize the performance of cars that are moderately modified, but do not require the clutch capacity of a multi-plate clutch. Similar to our multi-plate clutches, it has a purple anodized, forged aluminum cover. The aluminum cover is stiffer than a stamped cover and therefore allows a higher lever ratio to maintain the pedal efforts at a reasonable level. There is no clamp load deflection as found in a pressed metal type cover.
Pull Type Clutch The pull type clutch accommodates higher torque, in conjunction with lighter pedal efforts to produce a superior clutch operation, when adapted to most high-powered vehicles. An EXEDY Original design. Advantages • Unlike the push type cover, when a pull type cover flexes, it will flex in the direction of disengagement, assisting in positive pedal feel. • A longer lever ratio achieves a direct decrease in pedal effort.
Twin and Triple Plate For high-powered applications, EXEDY offers twin and triple Multi-Plate Clutches. These are designed for high power street action as well as drag, road and rally racing. The twin plate clutches are rated for approximately 500 ft.lbs. TQ @ FW. The triple plate clutches are rated for up to and over 800 ft.lbs. TQ @ FW. Twins come with both spring damper discs or solid discs depending on application. Triples are all solid discs and not recommended for street use.
Patented Clutch Cushioning Function Patented Center Plate Self Leveling Function The amount of center plate travel during release is always maintained in a neutral position by the reaction force of the lifting plate attached to both sides of the center plate. • Improved disengagement (accelerated separation from friction surface). • Improved disc life by eliminating unbalanced wear at the T/M and F/W side. • Prevents and lowers mechanical noise.
The flagship model of EXEDY clutches, the Carbon Steel Multi Plate Clutch. These Clutches are lightweight, durable and resilient to high heat, contributing to an improvement in track times. Warm Up Procedure Due to the inherent properties of the carbon material, we must specify the proper way to bring the discs up to operating temperature. This Process will heat the discs so they will hold the specified torque rating.
Light in Weight The heaviest components of the clutch system are the clutch cover, intermediate plates and flywheel. Semi-Carbon clutches incorporate an improved cover configuration and lightened flywheel also contributing to a reduction in vehicle rotating weight. Low Inertia Design The weight of a carbon clutch disc is one third that of a metallic disc. Utilizing a high friction coefficient Hyper Carbon disc which allows for quicker shift response.
Introducing the Next Generation ... ...of clutch systems by EXEDY – Carbon-D, the revolutionary Carbon Clutch System. Carbon-D was developed to achieve the ultimate goal of comfort and streetability by absorbing noise and vibration emitted from drivetrain components such as the differential, transmission and engine. The Carbon-D system is designed to protect the drivetrain by absorbing and dissipating “shock torque” by utilizing EXEDY Patented Technology.
Carbon-D Twin • Introduction of a damper to absorb and dissipate noise and vibration • With a reduction in pedal effort and an increase in disc size to 225mm, the Carbon-D Twin clutch is ideally suited to high performance street vehicles • By optimizing the weight and inertia of the Carbon-D Clutch System, driveability is improved at low speeds Gear Noise and Fluctuations Engine Rotation (rpm) in Even engines that seem to run very smoothly always have some amount of fluctuation in engine rotation.
Application Guide Stage 1 - Stage 2 - Flywheels Stage 1 & 2 clutches have a 10-30% higher pedal effort than OE due to higher clamp load. Stage 2 thin are for circuit track only! Not for street, rally or drag use. Engine Size Year Engine Code CL 2.2L 1997 Integra 1.8L Integra Make/Model STAGE 1 STAGE 2 Thick STAGE 2 Thin Kit Part # WTQ. Kit Part # WTQ. Kit Part # WTQ. F22B1 08805 199 08952 226 08901 226 1990-91 B18A1 08804 201 08953 228 08903 228 1.7L / 1.
Disc Size (mm) Light Weight Spline Teeth / Major Dia (mm) Flywheel Part # 220 24T / 26 --- 220 24T / 25 HF01 9.5 Cable Type Clutch 08017 220 24T / 26 HF01 9.5 GSR/VTEC, Cable Clutch 08028 220 24T / 26 HF01 9.5 Hydraulic Clutch KHC05 215 24T / 26 HF02T 8.9 6 Speed Trans KHC10 215 24T / 26 HF02T 8.9 5 Speed Trans KHC09 215 24T / 26 HF02T 8.9 6 Speed Trans HCK1001 225 14T / 25 --- 225 14T / 25 GF501 10.5 225 14T / 25 GF501 10.5 225 14T / 25 GF501 10.
Application Guide Stage 1 - Stage 2 - Flywheels Engine Size Year Engine Code Escort / ZX2 2.0L 1997-03 Focus 2.0/2.3L 2004-07 Make/Model STAGE 1 STAGE 2 Thick STAGE 2 Thin Kit Part # WTQ. Kit Part # WTQ. Kit Part # Zetec 10801 202 10958 229 --- Duratec 07804 205 07954 233 --- WTQ. Ford OEM Flywheel (Dual Mass Flywheel) must be changed to ZF502 when using performance clutch Kit (# 07084, #07954) Also need 6-cra Fusion 2.3L 2006-07 Mustang 5.
Disc Size (mm) Light Weight Spline Teeth / Major Dia (mm) Flywheel Part # 225 22T / 24.3 --- 225 23T / 26.2 ZF502 12.5 FMK1009 12.5 FMK1004 Weight Notes (lbs.) SOHC / DOHC Standard Clutch Kit Part # 07083 ank bolts (part # 1S7Z-6379-AA) from Dealer. 225 22T / 24.3 ZF502 265 10T / 27.5 --- 265 26T / 29 --- 280 10T / 27.5 EF503 (6 Bolt) 16.1 GT, Shelby GT, Bullitt, Cushion Button Disc EF502 (8 Bolt) 16.1 GT, Shelby GT, Bullitt, Paddle Style Disc EF503 (6 Bolt) 16.
Application Guide Stage 1 - Stage 2 - Flywheels Engine Size Year Engine Code Accord 2.2L 1990-97 Accord 2.3L Accord 2.4L Make/Model STAGE 1 STAGE 2 Thick STAGE 2 Thin Kit Part # WTQ. Kit Part # WTQ. Kit Part # WTQ. F22 08805 199 08952 226 08901 226 1990-02 F23 08805 199 08952 226 08901 226 2003-07 K24 08806 205 08951 233 08905 233 Honda Must change Flywheel to HF02T when using performance clutch Kit (# 08806, #08951, #08905) Civic 1.
Disc Size (mm) Light Weight Spline Teeth / Major Dia (mm) Flywheel Part # 220 24T / 26 --- 08014 220 24T / 26 --- HCK1000 215 24T / 26 HF02T 200 21T / 22 --- 08009 200 20T / 22 --- 08011 212 20T / 22 HF501 10.9 08012 212 20T / 22 HF501 10.9 08022 200 20T / 22 --- 212 20T / 22 HF501 10.9 SOHC 08012 212 20T / 22 HF501 10.9 SOHC 08022 212 20T / 22 HF501 10.9 SOHC KHC08 220 24T / 26 HF01 9.5 VTEC / DOHC KHC05 215 24T / 26 HF02T 8.
Application Guide Stage 1 - Stage 2 - Flywheels Engine Size Year Engine Code Del Sol 1.5/1.6L 1993-95 Del Sol 1.6L 1996-97 Make/Model STAGE 1 STAGE 2 Thick Kit Part # WTQ. Kit Part # D15 / D16 08801A 179 D16 08801A 179 STAGE 2 Thin Kit Part # WTQ. --- 08902A 215 --- 08902A 215 228 WTQ. Honda continued Must change flywheel to HF501 for performance clutch kit (# 08801A, #08902A). Del Sol 1.6L 1994-97 B16A 08800B 210 08950B 228 08900B Fit 1.
Disc Size (mm) Light Weight Spline Teeth / Major Dia (mm) Flywheel Part # 212 20T / 22 HF501 10.9 SOHC 08022 212 20T / 22 HF501 10.9 S, Si, SOHC 08031 220 24T / 26 HF01 9.5 VTEC / DOHC KHC05 190 20/22.2 --- 220 24T / 26 --- KHC03 220 24T / 26 --- KHC03 215 18T / 20.6 --- KNS02 250 24T / 25.6 NF04 19.6 Coupe and Sedan (6spd only) 250 24T / 25.6 NF04 19.6 Coupe and Sedan (6spd only),Includes FW 250 24T / 25.6 NF05 240 21T / 29.8 --- 16082 240 21T / 29.
Application Guide Stage 1 - Stage 2 - Flywheels Engine Size Year Engine Code MX-5 Miata 1.8L 1994-05 MX-5 Miata 2.0L Protégé Make/Model STAGE 1 STAGE 2 Thick STAGE 2 Thin Kit Part # WTQ. Kit Part # WTQ. Kit Part # WTQ. BP-ZE 10805 168 10951 191 10901 191 2006-08 VE 10810 180 --- 2.0L 2004 FS-DE / ZE 10807 202 10956 229 --- Protégé 2.0L 2003-04 FS-DET 10807 202 10956 229 --- RX-7 1.2/1.3L 1984-91 12A / 13B 10806 183 10954 208 --- RX-7 1.
Disc Size (mm) Light Weight Spline Teeth / Major Dia (mm) Flywheel Part # 215 22T / 24.3 --- 215 23T / 26.2 ZF504 225 22T / 24.3 --- 225 22T / 24.3 --- 225 22T / 24.3 --- 236 23T / 26.2 ZF01 12.0 Turbo, FC3S 10037 236 23T / 26.2 ZF01 12.0 Turbo, FC3S 10037 Turbo, FD3S KMZ01 Weight Notes (lbs.) Standard Clutch Kit Part # KMZ03 9.1 6spd MZK1006 KMZ08 Mazdaspeed Turbo 10038 counterweight N351-11-521. 236 23T / 26.4 ZF01 12.0 236 23T / 26.2 ZF01 12.
Application Guide Stage 1 - Stage 2 - Flywheels Make/Model Engine Size Year Engine Code 2001-02 STAGE 1 STAGE 2 Thick STAGE 2 Thin Kit Part # WTQ. Kit Part # WTQ. Kit Part # 4G63T 05803 339 05952 385 --- 2001-02 4G63T 05803HD 402 05952HD 460 --- WTQ. Mitsubishi continued Lancer Evo 7 2.0L Must use MF04 for this application Lancer Evo 7 2.0L Must use MF04 for this application Lancer Evo 8 / MR / 9 2.0L 2003-07 4G63T 05803 339 05952 385 --- Lancer Evo 8 / MR / 9 2.
Disc Size (mm) Light Weight Spline Teeth / Major Dia (mm) Flywheel Part # 240 23T / 26.2 MF04 12.0 Non- USA Model 240 23T / 26.2 MF04 12.0 Non- USA Model 240 23T / 26.2 MF04 12.0 Pull Type, 5 Speed, 6 Speed MBK1001 240 23T / 26.2 MF04 12.0 Pull Type, 5 Speed, 6 Speed MBK1001 240 23T / 26.2 --- Pull Type, 5 Speed, 6 Speed MBK1009 240 23T / 26.2 --- Pull Type, 5 Speed, 6 Speed MBK1009 236 23T / 26.2 --- Turbo 05049 236 23T / 26.2 --- Turbo 05049 225 24T / 25.
Application Guide Stage 1 - Stage 2 - Flywheels Make/Model Engine Size Year Engine Code 3.5L 2007- VQ35HR STAGE 1 STAGE 2 Thick STAGE 2 Thin Kit Part # WTQ. Kit Part # WTQ. Kit Part # 06807 301 06956 342 --- WTQ. Nissan continued 350Z Recommended for use with Exedy Solid Flywheel (NF05), will also work with OE Dual-Mass Flywheel 810 2.4L 1977-81 L24E 06805A 223 06953A 253 --- Altima 3.5L 2002-06 VQ35DE 06804A 331 06952A 375 --- Bluebird 2.
Disc Size (mm) Light Weight Spline Teeth / Major Dia (mm) Flywheel Part # 250 24T / 25.6 NF05 225 24T / 25.6 --- 250 24T / 25.6 --- Includes SE-R 240 24T / 25.6 --- AWD, Turbo, Non US model 225 24T / 25.6 --- 225 24T / 25.6 --- 240 24T / 25.6 --- 06044 250 24T / 25.6 --- NSK1002 215 18T / 20.6 --- KNS02 240 24T / 25.6 --- 215 18T / 20.6 --- 240 24T / 25.6 NF02 240 24T / 25.6 240 Weight Notes (lbs.) Standard Clutch Kit Part # 19.
Application Guide Stage 1 - Stage 2 - Flywheels Engine Size Year Engine Code Grand AM 2.3L / 2.4L 1995-99 LD2 / LD9 Solstice 2.4L 2006-07 Sunfire 2.3L / 2.4L 1995-99 Vibe 1.8L 2003-06 9-2X 2.0L 9-2X Make/Model STAGE 1 STAGE 2 Thick STAGE 2 Thin Kit Part # WTQ. Kit Part # 04800 234 --- 04802 179 04951 LD2 / LD9 04800 234 --- 1ZZ-FE / 2ZZ-GE 16800 196 16950 223 --- 2005 15802 278 15950 316 15900 2.0L 2005 15802HD 319 15950HD 364 --- 9-2X 2.
Disc Size (mm) 225 Light Weight Spline Teeth / Major Dia (mm) Flywheel Part # 14T / 25 --- Weight Notes (lbs.) Standard Clutch Kit Part # 04162 Natural aspirated,Does not include CSC Hydraulic slave cylinder 225 26T / 29 --- TBA 225 14T / 25 --- 215 21T / 24.1 --- 230 24T / 25.2 FF01 12.7 Aero, Turbo, Pull Type KSB03 230 24T / 25.2 FF01 12.7 Aero, Turbo, Pull Type KSB03 225 24T / 25.2 FF02 12.7 Linear, Non Turbo, SOHC KSB04 230 24T / 25.2 FF502 12.
Application Guide Stage 1 - Stage 2 - Flywheels Engine Size Year Engine Code Legacy 2.5L 1997-05 Legacy GT 2.5L 2005-08 Make/Model STAGE 1 STAGE 2 Thick Kit Part # WTQ. Kit Part # EJ25 15801 196 --- EJ25T 15804 287 15952 15801 196 --- WTQ. STAGE 2 Thin Kit Part # WTQ. Subaru --326 --- Must change flywheel to FF502 for performance clutch kit (# 15804, #15952). Legacy 3.0L 2005 EZ30D --- Camry 2.5L 1988-91 2VZF 16803A 282 16953A 320 --- Camry 3.
Disc Size (mm) Light Weight Spline Teeth / Major Dia (mm) Flywheel Part # 225 24T / 25.2 FF02 12.7 Non Turbo, SOHC KSB04 230 24T / 25.2 FF502 12.7 Turbo, Push Type FJK1001 225 24T / 25.2 FF02 12.7 Non Turbo, SOHC KSB04 240 21T / 29.8 --- 16082 240 21T / 29.8 --- 16082 215 21T / 24.1 --- KTY18 240 21T / 29.8 --- Turbo 16062 240 21T / 29.8 --- Turbo KTY11 215 21T / 24.1 --- VVLT-I KTY14 200 21T / 24.1 --- 4 Door 4 Speed & All w/5 Speed 16070 200 21T / 24.
Application Guide Stage 1 - Stage 2 - Flywheels Engine Size Year Engine Code Yaris 1.5L 2006- Supra 2.6L Supra Make/Model STAGE 1 STAGE 2 Thick STAGE 2 Thin Kit Part # WTQ. Kit Part # WTQ. Kit Part # 1NZ-FE 16800A 196 16950A 223 --- 1979-80 4ME 16801B 209 16951B 237 --- 2.8L 1981 5ME 16801B 209 16951B 237 --- Tercel 1.5L 1991-94 3E-E 16804B 143 16954B 162 --- Tercel 1.5L 1995-98 5E-FE 16804B 143 16954B 162 --- 4-Runner 2.
Disc Size (mm) Light Weight Spline Teeth / Major Dia (mm) Flywheel Part # 215 21T / 24.1 --- 225 21T / 29.8 --- 16016 225 21T / 29.8 --- 16016 200 21T / 24.1 --- 200 21T / 24.1 --- 225 21T / 29.8 --- Non Turbo 16057 225 21T / 29.8 --- 2WD & 4 WD 16058 225 21T / 29.8 --- 2WD 16058 250 21T / 29.8 --- 240 21T / 29.8 --- 250 21T / 29.8 --- 225 21T / 29.8 --- Non Turbo 16057 225 21T / 29.8 --- 2WD & 4 WD 16058 225 21T / 29.8 --- 2WD 16058 250 21T / 29.
Application Guide Stage tage 3, 4, 5 & Carbon arbon * Does Not Include Bearing Make/Model Acura Integra Single Carbon Stage 4 – Twin Cerametallic Liter Year Engine 1.8L 1990-91 B18A1 NEW Stage 3 – Single Cerametallic Twin Carbon 1.7 / 1.8L 1992-93 B17A / B18A NSX 1.8L 3.
Disc Size (mm) 200 Type Spline (Push Teeth / Major or Pull) Dia (mm) PUSH 24T / 25 184 200 77 23 77 23 77 23 77 23 184 77 23 77 23 200 77 23 184 77 23 225 PUSH 24T / 26 PP Assby.
Application Guide Stage tage 3, 4, 5 & Carbon arbon Make/Model Single Carbon Stage 4 – Twin Cerametallic GH02SD SINGLE CERA YES 358 LS-1 / LS-6 GH01SD SINGLE CERA YES 472 GT01SD TWIN CERA YES 574 GM013SBMC1 TRIPLE CARBON NO 834 GH01SD SINGLE CERA YES 472 GT04SD TWIN CERA YES 574 TRIPLE CARBON NO 834 TWIN CERA YES 574 GM013SBMC1 TRIPLE CARBON NO 834 EH01SD SINGLE CERA YES 358 EH05SD SINGLE CERA YES 358 EH02SD1 SINGLE CERA YES 472 2.
Disc Size (mm) Type Spline (Push Teeth / Major or Pull) Dia (mm) Flywheel to Crank Bolt ft-lb PP Assby. to Flywheel ft-lb Notes Standard Clutch Kit Part # 225 PUSH 14T / 25 39** 23 Super Charged GMK1016 250 PUSH 26T / 29 74 23 6 Speed Trans. (3) 04173 74 23 C5 74 23 74 23 74 23 74 23 74 23 74 23 215 225 250 PUSH 26T / 29 215 225 215 PUSH 26T / 29 225 6 Speed Trans. (3) GMK1018 Z06,C6 , 6 Speed Trans.
Application Guide Stage tage 3, 4, 5 & Carbon arbon Make/Model Single Carbon Stage 4 – Twin Cerametallic Liter Year Engine 3.5L 2003-06 VQ35DE NEW Stage 3 – Single Cerametallic Twin Carbon Stage 5 – Triple Cerametallic Triple Carbon Sprung Torque Center Capac. (D-core) (Lbs-ft) Number of Disc Disc Material NM072SBMC1 TWIN CARBON NO 426 NM072SDMC1 TWIN CARBON YES 482 NT01HDMC TWIN CARBON YES 600 TRIPLE CARBON NO 900 TWIN CARBON YES 600 Part # Infiniti G35 3.
Disc Size (mm) 200 Type Spline (Push Teeth / Major or Pull) Dia (mm) 23 225 66 23 225 66 23 225 66 23 PUSH 24T / 25.6 PP Assby. to Flywheel ft-lb 66 225 PUSH Flywheel to Crank Bolt ft-lb 24T / 25.6 Notes Standard Clutch Kit Part # 8 flywheel crank bolts required part Number #12315-30P01 NSK1000 Available Summer 2009 6spd, Supercharged / Available Summer 2009 6spd, Supercharged / Available Summer 2009 200 PUSH 22T / 24.3 200 200 PUSH 23T / 26.
Application Guide Stage tage 3, 4, 5 & Carbon arbon Single Carbon Make/Model Stage 4 – Twin Cerametallic Liter Year Engine 1.3L 2003-07 13B-MSP NEW Stage 3 – Single Cerametallic Twin Carbon Stage 5 – Triple Cerametallic Triple Carbon Sprung Torque Center Capac.
Disc Size (mm) 200 Type Spline (Push Teeth / Major or Pull) Dia (mm) 23 225 48 23 200 48 23 200 48 23 200 48 23 200 48 23 200 48 23 200 48 23 99 23 200 99 23 200 99 23 200 99 23 225 99 23 200 99 23 200 99 23 200 99 23 99 23 200 99 23 200 99 23 200 99 23 225 99 23 200 99 23 200 99 23 200 99 23 200 200 PULL PULL PULL 23T / 26.2 PP Assby. to Flywheel ft-lb 48 200 PUSH Flywheel to Crank Bolt ft-lb 23T / 26.2 23T / 26.2 23T / 26.
Application Guide Stage tage 3, 4, 5 & Carbon arbon Make/Model Single Carbon Liter Nissan continued 300 ZX 3.0L Stage 4 – Twin Cerametallic Year Engine 1990-96 VG30DETT NEW Stage 3 – Single Cerametallic Twin Carbon Part # NM062SBMC NM062SD 350Z GTR R32 (early) 3.5L 2003-06 VQ35DE 3.5L 2007- VQ35HR 2.6L 8/89-2/93 RB26DETT • • • • • GTR R32 (late), R33 2.6L 2/93-98 RB26DETT • GTR R34 2.6L 99-02 RB26DETT • Skyline R32/R33 2.0L / 2.
Disc Size (mm) 200 Type Spline (Push Teeth / Major or Pull) Dia (mm) 23 200 66 23 200 66 23 200 66 23 66 23 225 66 23 225 66 23 225 66 23 PUSH 24T / 25.6 PP Assby. to Flywheel ft-lb 66 200 PUSH Flywheel to Crank Bolt ft-lb 24T / 25.6 225 PUSH 24T / 25.6 225 PUSH 24T / 25.
Application Guide Stage tage 3, 4, 5 & Carbon arbon Make/Model Single Carbon Liter Stage 4 – Twin Cerametallic Year Nissan continued Skyline R32/R33 Skyline R34 2.0L / 2.5L 5/89-98 2.5L 5/99-00 Engine NEW Stage 3 – Single Cerametallic RB20, 25DET RB25DET • Silvia S13 / S14 2.0L 93-1999 SR20DET • Twin Carbon • Pontiac Firebird 2.0L 5.7L 3/99-2000 SR20DET 1998-02 LS-1 5.7L / 6.
Disc Size (mm) 200 Type Spline (Push Teeth / Major or Pull) Dia (mm) PUSH 21T / 29.8 200 200 110 23 110 23 110 23 110 23 200 110 23 225 110 23 200 110 23 200 110 23 66 23 225 66 23 200 66 23 200 66 23 200 66 23 200 66 23 66 23 66 23 225 66 23 225 66 23 200 66 23 200 66 23 74 23 215 74 23 225 74 23 74 23 215 74 23 225 74 23 55 23 200 55 23 200 55 23 200 55 23 PUSH 24T / 25.6 PP Assby.
Application Guide Stage tage 3, 4, 5 & Carbon arbon Make/Model Single Carbon Stage 4 – Twin Cerametallic Liter Year Engine xA 1.5L 2003-06 1NZ-FE xB 1.5L 2003-06 1NZ-FE Scion Subaru BAJA 2.5L 2004-05 EJ25T Forester 2.5L 2004-05 EJ25T Impreza WRX 2.0L 2002-05 EJ20T Impreza WRX STI Toyota Celica 2.5L 2006-08 EJ25T 2.5L 2004-08 EJ25T 2.0L 1990-94 3S-GTE NEW Stage 3 – Single Cerametallic Twin Carbon 54 2000-05 2ZZ-GE/ 1ZZ-FE Triple Carbon Sprung Torque Center Capac.
Disc Size (mm) 200 Type Spline (Push Teeth / Major or Pull) Dia (mm) PUSH 21T / 24.1 PUSH 21T / 24.1 Flywheel to Crank Bolt ft-lb PP Assby. to Flywheel ft-lb 66 23 66 23 66 23 66 23 55 55 55 55 55 55 55 55 55 55 23 23 23 23 23 23 23 23 23 23 200 55 23 200 55 23 200 55 23 225 55 23 200 55 23 200 200 200 225 200 200 225 225 200 200 225 225 200 PULL 24T / 25.2 PULL 24T / 25.2 PULL 24T / 25.
Application Guide Stage tage 3, 4, 5 & Carbon arbon Make/Model Single Carbon Liter Toyota continued Stage 4 – Twin Cerametallic Year Engine Twin Carbon NEW Stage 3 – Single Cerametallic Stage 5 – Triple Cerametallic Part # Number of Disc Disc Material Triple Carbon Sprung Torque Center Capac. (D-core) (Lbs-ft) Corolla 1.6L 85-89 4A-GE TH01SD SINGLE CERA YES 247 ECHO 1.5L 2000-05 1NZ-FE TH06SD SINGLE CERA YES 247 MR-2 1.6L 1986-89 4A-GE TH01SD SINGLE CERA YES 247 2.
Disc Size (mm) Type Spline (Push Teeth / Major or Pull) Dia (mm) Flywheel to Crank Bolt ft-lb PP Assby. to Flywheel ft-lb 200 PUSH 21T / 24.1 55 23 200 PUSH 21T / 24.1 66 23 200 PUSH 21T / 24.1 55 23 225 PUSH 21T / 29.8 80 23 225 80 23 200 80 23 200 Notes Standard Clutch Kit Part # AE86 / AE92 / AE101 / AE111, GTS 16070 16074 Turbo, (5) 16062 80 23 200 PUSH 21T / 24.
Hyper Single Repair Parts Hyper Single Repair Parts PART NO. BH01SD BH02SD EH01SD EH02SD1 EH03SD EH04SD EH05SD FH01SD FH02SD1 GH01SD GH02SD HH01SD HH02SD HH03SD HH04SD1 HH06SD MH01SD NH01SD1 NH02SD NH03SD1 NH04SD NH08SD TH01SD TH02SD TH03SD TH04SD TH06SD ZH01SD ZH02SD 58 C.
Hyper Multi Plate Repair Parts Hyper Multi-P-late Repair Parts PART NO. C.COVER P.PLATE I.M. PLATE DISC Assy DISC Assy DISC Assy SPLINE HUB D.
Hyper Multi Plate Repair Parts Hyper Multi-Plate Repair Parts PART NO. C.COVER P.PLATE I.M. PLATE DISC Assy 4-A DISC Assy DISC Assy 4-B 4-C SPLINE HUB D.
Hyper Carbon Single Repair Parts Hyper Carbon Single Repair Parts 3 4 2 1 C.
Hyper Carbon Multi Plate Repair Parts Hyper Carbon Multi-P-late Repair Parts 2 1 7 3 4 *O.H. KIT (over haul kit) contain P.Plate, I.M. Plate, and driven plate PART# O.H. KIT C.COVER PRESS PLATE I.M. PLATE DRVN PLATE SPLINE HUB/ DAMPER D. BOSS SET F/W BOLT SET PVT.
PART# O.H. KIT C.COVER PRESS PLATE I.M. PLATE DRVN PLATE SPLINE HUB/ DAMPER D. BOSS SET F/W BOLT SET PVT.
