Use and Care Manual

3-PIECE PROFESSIONAL AIR TOOL KIT
11
10
4. Choose the correct impact socket (S) as
needed and mount it onto the anvil (H2).
(See Figure 10)
5. Connect air supply hose to the male plug.
(See Figure 11)
WARNING! Only use impact sockets
that have a RPM and Torque rating
equal to or greater than the tool itself.
6. Set the working pressure at 90psi/6.3bar for
best tool performance.
NOTE: Working pressure refers to the
air line pressure set to tool when tool
is under working conditions.
H2
S
12