Use and Care Manual

ManualsBrandsEXELAIR ManualsAir Compressors, Tools & AccessoriesProfessional Automotive Composite Air Tool and Accessory Kit with High Torque Impact Wrench (50-Piece)

50-PIECE COMPOSITE AIR TOOL KIT

AIR HAMMER

B3

12

1. Remove the air inlet protective cap from the

air inlet (B3). (See Figure 12)

11

10

4. Apply the 3/8" to 1/2" adaptor (H) to the anvil

(B2). Choose the correct impact socket (J) as

needed and mount it onto the adaptor (H).

(See Figure 10)

5. Connect air supply hose to the male plug.

(See Figure 11)

WARNING! Only use impact sockets

that have an RPM and Torque rating

equal to or greater than the tool itself.

6. Set the working pressure at 90psi/6.3bar for

best tool performance.

NOTE: Working pressure refers to the

air line pressure set to tool when tool

is under working conditions.

B2

J H

14