Use and Care Manual

ManualsBrandsEXELAIR ManualsAir Compressors, Tools & AccessoriesProfessional Automotive Composite Air Tool and Accessory Kit with High Torque Impact Wrench (50-Piece)

50-PIECE COMPOSITE AIR TOOL KIT

C4

B4

D4

P

22

23

24

7. Connect air supply hose to the male plug.

(See Figure 24)

8.

Set the working pressure at 90psi/6.3bar for

best tool performance.

NOTE: Working pressure refers to the

air line pressure set to tool when tool

is under working conditions.

5. Insert a grinding stone (P) into the collet (D4).

(See Figure 22)

6. Tighten the collet jacket (B4) clockwise with

large wrench while holding the small wrench

on the flats of the collet holder (C4). Make sure

that the grinding stone is installed securely and

tightly. (See Figure 23)

WARNING! Only use grinding

accessories that have an RPM rating

equal to or greater than the tool itself.

18