User Manual
XP600/1100/2000INSTALLATION ANDOPERATIONMANUAL
CAUTION:
WARNING:
WARNING:
CAUTION:
It is essential to read and understand all Warnings,
Cautions, and Notes before any connections are made to the
unit or system. If further assistance is needed call (817) 595-
4969 and ask for Customer Service.
The inverter is designed to operate from a Battery.
Performance cannot be guaranteed, and damage can result
whenachargerorpowersupplyisusedwithoutabatteryinthe
circuit.
Before any connections are made to the unit or
system, be sure to disconnect the battery terminals. Always
disconnect the grounded battery terminal first. When re-
connecting, connect ungrounded terminal first, and grounded
terminallast.
.
.
.
.
.
.
The AC neutral lead is bonded to chassis through
the barrier terminal strip connector located on the back of unit.
Chassis must be bonded to earth ground through the external
ground connector located on the rear of the unit.
(See Appendix C)
The Negative or Positive terminal of the battery (DC Source)
must be bonded to earth ground. It's recommended that it be to
the same earth ground used for AC ground.
Installation
3.0
Page8