Owner's Manual

10 Exergen TAT-5000S
The following chart summarizes the conditions that may occur while the TemporalScanner is in
use, and the associated indications:
Condition Display Range
High Target HI > 43 °C (110° F)
Low Target LO < 16 °C (61° F)
High Ambient HI A > 40 °C (104° F)
Low Ambient LO A < 16 °C (61° F)
Low Battery bAtt
No or Very Low Battery blank display
Processing Error Err Restart. Return to Exergen
for repair if error message
persists.
Scanning
(Normal Operation)
- - - -
The TemporalScanner can be used in either °F or
°C. To convert from one scale to the other, the only
tools necessary are a paper clip and the tip of a
small screwdriver.
For °F/°C Conversion:
• Insert the end of a bent paper clip into the pinhole
on the side to release and remove the cover.
Remove the battery from the compartment.
• Locate the switch, and with the tip of a
screwdriver, slide left or right to the opposite
position.
• Remove the screwdriver.
• Replace cover.
Display Diagnostics Chart
Fahrenheit or Celsius Conversion