Instructions / Assembly

Table Of Contents

ASSEMBLY

Step 4

Remove four Screws (75) from the Console (9) first.

4A Installing the Handlebar: Place the Handlebar (4) onto the Front Frame (1), Secure the

Handlebar (4) onto the Front Frame (1) with four Flat Washers (33) and four Hexagon Socket

Bolts (58). Tighten the Bolts (58) with the 5mm Allen Wrench with Philips Screwdriver

provided.

4B Connecting the Computer Wire to the Sensor Wire: Connect the Hand Pulse Sensor (9A)

to the Hand Pulse Sensor Wire (79). See Figure C. Connect the Computer Wire (9B) to the

Sensor Wire (13). See Figure D. Attach the Console (9) onto the Handlebar (4) and secure with

four Screws (75) that were previous removed. Tighten the Screws (75) with the 5mm Allen

Wrench with Philips Screwdriver provided.

PRE-INSTALLED HARDWARE

(58) Hexagon Socket Bolt

4PCS

(33) Flat Washer

4PCS

5mm Allen Wrench with

Phillips Screwdriver

1PC

TOOL

Figure C

Figure D