Instructions / Assembly

11
ASSEMBLY
Step 2
2A. Remove the hardware from the Front & Rear Stabilizer (05) & (06).
2B. Front Stabilizer Installation: Attach the Front Stabilizer (05) onto the front curve of the Main
Frame (1). Secure with two Carriage Bolts (76), two Curve Washers (07), two Spring Washers
(54) and two Cap Nuts (08) and then tighten using the 13, 15 and 19mm Wrench provided.
2C. Rear Stabilizer Installation: Attach the Rear Stabilizer (06) onto the rear curve of the Front
Frame (02). Secure with two Carriage Bolts (76), two Curve Washers (07), two Spring Washers
(54) and two Cap Nuts (08) and then tighten using the 13,15 and 19mm Wrench provided.
TOOL
13,15,19mm Wrench
1PC
HARDWARE PACK
(07) Curve Washers
4PCS
(54) Spring Washers
4PCS
(08) Cap Nuts
4PCS
(76) Carriage Bolts
4PCS
bolt