Instructions / Assembly

ASSEMBLY

Step 5

5A. Installing the Console: Remove four Phillips Screws (27) from the backside of the Console

(20). Remove the Handlebar Cover (60) from the back of the Handlebar (04). Be sure to insert the

Console Wire I (20A), Console Wire II (20B), and Tension Control Knob Wire (23) into the

opening on top of the Handlebar (04) and feed them out the back through Handlebar Cover (60)

hole. Attach the Console (20) onto the Handlebar (04) and tighten with four Phillips Screws (27).

Tighten the hardware by using the Multi-Hex Tool with Phillips Screwdriver provided.

5B. Attach the Handlebar: Insert the Handlebar (04) onto the Front Frame (02).

Multi Hex Tool with

Phillips Screwdriver

1PC

TOOLS

20B

20A