Instructions / Assembly

15
ASSEMBLY
Step 6
Tip: If you need more room to install, lift the handlebars up.
6A. Installing the Tension Control Knob: Remove the Handlebar Cover (60) from the back of
the Handlebar (04). Turn the Tension Control Knob (23) to the highest tension by turning it
CLOCKWISE See Figure A-1. Hook the tension cable from the Tension Control Knob (23) into
the cable lock of the Tension Cable (64) coming from the Front Frame (01). See Figure A.
Remove the Clip (64A) after the two cables have been locked and turn the Tension Control Knob
(23) to the lowest tension by turning it COUNTER-CLOCKWISE . See Figure A-3. See Figure A-4
for an example of how the cable lock should look like.
6B. Connecting the Console Wire to the Sensor Wire and Pulse Sensor: Connect the Console
Wire I (20A) to the Sensor Wire (21). See Figure B. Connect the Pulse Sensor I (30B) to the
Pulse Sensor II (30B). See Figure B.
Then re-attach the Handlebar Cover (60) onto the back side of the Handlebar (04).