User's Manual

QA-MRK-FM-08-02 v1
To factory reset any of the Diggit XLs and break its Bluetooth connection, long press the MFB (1) and
Multi-Pair Button (4) together for 10 seconds. The “master” Diggit XL will then re-enter pairing mode and
the LED indicator (8) will flash white.
Using the Stake
The Diggit XL Outdoor Bluetooth Speaker’s removable stake means that it can be used at all sorts of
outdoor locations without muffling sound, such as the beach, picnics, BBQs, festivals, garden parties,
camping, and more!
How to safely apply and use the removable stake
1. Pull the Stake (10) out of the Stake Tube (9)
2. Turn the Stake (10) 180 degrees and push back into the Stake tube (9) (see figure 1)
3. Push the assembled stake into the ground. Please ensure that you do this safely and
carefully and ensure that the stake is only pushed in by hand. (see figure 2). DO NOT use any
objects or the Diggit XL itself to hit it into the ground
4. Make sure the bottom of the speaker is a sufficient distance from the ground to allow easy
and safe removal. DO NOT push the entire stake into the ground
5. Carefully place the Diggit XL onto the Stake Tube (9) (see figure 3)
How to safely extract and store the removable stake
6. When you have finished using the Diggit XL, carefully remove the Speaker from the Stake
Tube (9)
7. Grab the lower end of the Stake Tube (9) and the exposed part of the Stake (10) and
carefully pull out of the ground. DO NOT wiggle the stake or apply undue pressure when
removing to prevent damage to the product
8. If the Stake Tube (9) or Stake (10) has dirt on it, clean with a damp cloth before returning the
Stake (10) into the Stake Tube (9) for safe keeping
Note: Only apply the stake into ground suitable for use, such as soft grass, sand, or snow.