User's Manual

ManualsBrandsEXERTIS UK ManualsAudio EquipmentENGAGE 2 WIRELESS HEADPHONES WITH ANC

QA-MRK-FM-07-02 v1

REG02 – International – US (MINUS CANADA)

FRONTCOVER

ENGAGE 2

BLUETOOTH HEADPHONES

WITH ACTIVE NOISE CANCELLING

User Manual

INNER LEAF

Please read this manual carefully before use.

WARNING

• Please do not get the product wet. If your product is IP rated, please follow guidelines on

how to safely use your product overleaf.

• Please don’t take the product apart. There are no user serviceable parts inside

• Please don’t modify or alter the product or accessories

• Please don’t expose the product to extreme temperatures or rapid changes of hot to cold or

vice versa

• Please don’t use damaged cables or plugs, or loose electrical sockets

• Please don’t touch the device, cables, plugs, or the electrical socket with wet hands or other

wet body parts

• Please don’t pull the cable excessively when disconnecting it if the cable is not fixed

• Please don’t bend or damage the cable

• Please don’t drop or cause an impact to the product or the device

• Please don’t place naked flame sources, such as lighted candles, on the product

Protect your hearing and ears when using a headset

• Excessive exposure to loud sounds can cause hearing damage

• Exposure to loud sounds while walking may distract your attention and

cause an accident

• Always turn the volume down before plugging the earphones into an audio source and use only

the minimum volume setting necessary to hear your conversation or music

Summary of content (6 pages)

PAGE 1
REG02 – International – US (MINUS CANADA) FRONTCOVER ENGAGE 2 BLUETOOTH HEADPHONES WITH ACTIVE NOISE CANCELLING User Manual INNER LEAF Please read this manual carefully before use. WARNING • • • • • • • • • • Please do not get the product wet. If your product is IP rated, please follow guidelines on how to safely use your product overleaf. Please don’t take the product apart.
PAGE 2
• In dry environments, static electricity can build up in the headset. Avoid using headsets in dry environments or touch a metal object to discharge static electricity before connecting a headset to the device • Do not use a headset while driving or riding.
PAGE 3
Give the headphones a full charge before their first use. 1. Connect the Micro USB Charge Cable to the Micro USB Charging Port (1) and plug into power 2. The Battery LED (2) will be red whilst charging which will take up to 2 hours 3. Once fully charged the Battery LED (2) will turn green Note: The first charge may take up to 2 hours to complete. Pairing the headphones to your device 1. Hold the MFB (6) down for 5 seconds. You will see the LED Indicator (9) flash red and blue and enter pairing mode 2.
PAGE 4
Specifications Bluetooth® technology v5.0 Bluetooth connectivity distance Frequency band Transmission power S/N Frequency response Drivers Output RMS Battery Play time Charging time Working temperature Headphone (mm) Cable length Weight up to 10 m 2.402GHz-2.480GHz +1 dBm (conducted) ≥80 dB 20 - 20, 000 Hz 40mm 6mW LiPo Bluetooth with ANC off play time - 22 hours Bluetooth with ANC on play time - 13 hours Wired use with ANC on play time - 33 hours Up to 2 hours -10℃ to +45℃ H210 x W180 xD80 1.
PAGE 5
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help The use and operation of this product is beyond our control.