Manual
Table Of Contents
- Certification Information
- 1 Introducing the AXS-100 Series OTDR
- 2 Safety Information
- 3 Getting Started with Your OTDR
- 4 Customizing Your OTDR
- 5 Setting Up Your OTDR
- 6 Testing Fibers
- 7 Managing Test Results
- 8 Using Your OTDR as a Light Source
- 9 Measuring Power or Loss
- 10 Identifying Fiber Faults Visually
- 11 Inspecting Fibers with the FIP
- 12 Testing Network Connections
- 13 Maintenance
- 14 Troubleshooting
- 15 Warranty
- A Technical Specifications
- B Description of Event Types
- Index
Inspecting Fibers with the FIP
92 AXS-100 Series
Adjusting Brightness and Contrast for the FIP
Adjusting Brightness and Contrast for the FIP
You can adjust brightness and contrast of the image displayed on screen.
1. Press Menu, select Probe, and press Enter.
2. Select Display Settings (F1/F2 key).
3. Use the up/down arrows to switch between
brightness and contrast controls.
4. Use the left/right arrows to adjust level.
5. Confirm new settings with OK (F1 key).