Manual
Table Of Contents
- Certification Information
- 1 Introducing the AXS-100 Series OTDR
- 2 Safety Information
- 3 Getting Started with Your OTDR
- 4 Customizing Your OTDR
- 5 Setting Up Your OTDR
- 6 Testing Fibers
- 7 Managing Test Results
- 8 Using Your OTDR as a Light Source
- 9 Measuring Power or Loss
- 10 Identifying Fiber Faults Visually
- 11 Inspecting Fibers with the FIP
- 12 Testing Network Connections
- 13 Maintenance
- 14 Troubleshooting
- 15 Warranty
- A Technical Specifications
- B Description of Event Types
- Index
Testing Network Connections
96 AXS-100 Series
Performing a Ping Test
To perform a ping test:
1. Connect the network cable to the RJ-45 port located on the left panel of
your unit.
2. Press Menu, select Network Tests > Ping, and then press Enter.
3. Enter the URL or IP address to reach as
follows:
3a. Press Enter to open the Address list.
3b. Select an existing URL or IP address.
OR
Select New to define a new address, and then press Enter to
display the on-screen keyboard (for details about using
keyboards, see Using Menus and Keypad on page 13).
4. Select Ping (F1/F2 key).
You can stop a ping test at any time by pressing Cancel.
5. If desired, press Save to save the ping results in .txt format.