Manual
Table Of Contents
- Certification Information
- 1 Introducing the AXS-100 Series OTDR
- 2 Safety Information
- 3 Getting Started with Your OTDR
- 4 Customizing Your OTDR
- 5 Setting Up Your OTDR
- 6 Testing Fibers
- 7 Managing Test Results
- 8 Using Your OTDR as a Light Source
- 9 Measuring Power or Loss
- 10 Identifying Fiber Faults Visually
- 11 Inspecting Fibers with the FIP
- 12 Testing Network Connections
- 13 Maintenance
- 14 Troubleshooting
- 15 Warranty
- A Technical Specifications
- B Description of Event Types
- Index
OTDR 9
2 Safety Information
Laser Safety Information (Units without VFL)
Your instrument is a Class 1M laser product in compliance with standards
IEC 60825-1 and 21 CFR 1040.10. Invisible laser radiation may be
encountered at the output port.
The product is safe under reasonably foreseeable conditions of operation
but it may be hazardous if you use optics within a diverging or collimated
beam. Do not view directly with optical instruments.
WARNING
Do not install or terminate fibers while a light source is active.
Never look directly into a live fiber and ensure that your eyes are
protected at all times.
WARNING
Use of controls, adjustments and procedures for operation and
maintenance other than those specified herein may result in
hazardous radiation exposure or impair the protection provided by
this unit.
Affixed to back
(under the stand)