Manual
Table Of Contents
- Certification Information
- 1 Introducing the AXS-100 Series OTDR
- 2 Safety Information
- 3 Getting Started with Your OTDR
- 4 Customizing Your OTDR
- 5 Setting Up Your OTDR
- 6 Testing Fibers
- 7 Managing Test Results
- 8 Using Your OTDR as a Light Source
- 9 Measuring Power or Loss
- 10 Identifying Fiber Faults Visually
- 11 Inspecting Fibers with the FIP
- 12 Testing Network Connections
- 13 Maintenance
- 14 Troubleshooting
- 15 Warranty
- A Technical Specifications
- B Description of Event Types
- Index
OTDR 15
4 Customizing Your OTDR
Selecting the Distance Units
There are three distance units available: meters, miles, and kilofeet.
Note: The attenuation values are always expressed in dBs per kilometer.
To select distance units:
1. Press Menu, select Setup > Unit, and then
press Enter.
2. Use the left/right function arrows until you
see Regional Settings, and then press F2 to
display the pane.
3. Press Enter to open the Distance unit list.
4. With the current distance unit highlighted, use the up/down arrows to
select the desired unit, and then press Enter to activate it.