Manual
Table Of Contents
- Certification Information
- 1 Introducing the AXS-100 Series OTDR
- 2 Safety Information
- 3 Getting Started with Your OTDR
- 4 Customizing Your OTDR
- 5 Setting Up Your OTDR
- 6 Testing Fibers
- 7 Managing Test Results
- 8 Using Your OTDR as a Light Source
- 9 Measuring Power or Loss
- 10 Identifying Fiber Faults Visually
- 11 Inspecting Fibers with the FIP
- 12 Testing Network Connections
- 13 Maintenance
- 14 Troubleshooting
- 15 Warranty
- A Technical Specifications
- B Description of Event Types
- Index
Customizing Your OTDR
18 AXS-100 Series
Adjusting the Brightness
Adjusting the Brightness
To fit your work environment, you may adjust the LCD brightness. Values
are kept in memory when you turn the unit off.
To adjust the display brightness:
Press the key repeatedly to switch between brightness levels (0-3-6-9).
OR
1. Press Menu, select Setup > Unit, and then
press Enter.
2. If necessary, use the left/right function
arrows until you see General, and then
display the pane (F1/F2 key).
By default, the Brightness slider is selected.
3. Use the left/right arrows to adjust the brightness level.