Manual
Table Of Contents
- Certification Information
- 1 Introducing the AXS-100 Series OTDR
- 2 Safety Information
- 3 Getting Started with Your OTDR
- 4 Customizing Your OTDR
- 5 Setting Up Your OTDR
- 6 Testing Fibers
- 7 Managing Test Results
- 8 Using Your OTDR as a Light Source
- 9 Measuring Power or Loss
- 10 Identifying Fiber Faults Visually
- 11 Inspecting Fibers with the FIP
- 12 Testing Network Connections
- 13 Maintenance
- 14 Troubleshooting
- 15 Warranty
- A Technical Specifications
- B Description of Event Types
- Index
36 AXS-100 Series
Setting Storage Parameters
To set the file format:
1. Press Menu, select Setup > OTDR, and then press Enter.
2. Use the left/right function arrows until you see Storage, and then
display the pane (F1/F2 key).
3. Use the arrows to select Default file format, and then press Enter to
open the list.
4. Use the up/down arrows to select the desired format, and then press
Enter to confirm.
To revert to the factory-default for file format and autonaming
scheme:
1. Press Menu, select Setup > OTDR, and then press Enter.
2. Use the left/right function arrows until you see Storage, and then
display the pane (F1/F2 key).
3. Use the up/down arrows to select Default, and then press Enter to
confirm.