Manual
Table Of Contents
- Certification Information
- 1 Introducing the AXS-100 Series OTDR
- 2 Safety Information
- 3 Getting Started with Your OTDR
- 4 Customizing Your OTDR
- 5 Setting Up Your OTDR
- 6 Testing Fibers
- 7 Managing Test Results
- 8 Using Your OTDR as a Light Source
- 9 Measuring Power or Loss
- 10 Identifying Fiber Faults Visually
- 11 Inspecting Fibers with the FIP
- 12 Testing Network Connections
- 13 Maintenance
- 14 Troubleshooting
- 15 Warranty
- A Technical Specifications
- B Description of Event Types
- Index
Testing Fibers
46 AXS-100 Series
Testing in Manual (Advanced) Mode
8. Select pulse as follows:
8a. Use the arrows to select the Pulse list and press Enter to open the
list.
8b. Use the up/down arrows to select the desired pulse, and then
press Enter.
9. Select duration of the acquisition as follows:
9a. Use the arrows to select the Duration list, and then press Enter to
open the list.
9b. Use the up/down arrows to select the desired duration for the
acquisition, and then press Enter to confirm.
10. Press F
ASTRACE to start the acquisition.
You can stop the acquisition at any time by pressing F
ASTRACE once
again.