Manual
Table Of Contents
- Certification Information
- 1 Introducing the AXS-100 Series OTDR
- 2 Safety Information
- 3 Getting Started with Your OTDR
- 4 Customizing Your OTDR
- 5 Setting Up Your OTDR
- 6 Testing Fibers
- 7 Managing Test Results
- 8 Using Your OTDR as a Light Source
- 9 Measuring Power or Loss
- 10 Identifying Fiber Faults Visually
- 11 Inspecting Fibers with the FIP
- 12 Testing Network Connections
- 13 Maintenance
- 14 Troubleshooting
- 15 Warranty
- A Technical Specifications
- B Description of Event Types
- Index
Managing Test Results
58 AXS-100 Series
Using Markers
Using Markers
You can use markers (A and B) to view the position and level of an event
on a trace.
Note: If you do not see the markers on your unit, they are probably hidden
(see Setting General OTDR Parameters on page 24).
To move a marker:
1. Press Menu, select OTDR, and then press Enter.
2. Use the left/right function arrows until you see Trace, and then display
the pane (F1/F2 key).
3. Use Next Marker (F1/F2 key) to select the
marker to move.
4. Use the left and right arrows to move the
marker along the trace.
If a marker is moved too close to another,
both will move together to ensure a
minimum distance between them.
5. When you have finished, use the left/right function arrows until you see
Exit, and then close the pane (F1/F2 key).