Manual
Table Of Contents
- Certification Information
- 1 Introducing the AXS-100 Series OTDR
- 2 Safety Information
- 3 Getting Started with Your OTDR
- 4 Customizing Your OTDR
- 5 Setting Up Your OTDR
- 6 Testing Fibers
- 7 Managing Test Results
- 8 Using Your OTDR as a Light Source
- 9 Measuring Power or Loss
- 10 Identifying Fiber Faults Visually
- 11 Inspecting Fibers with the FIP
- 12 Testing Network Connections
- 13 Maintenance
- 14 Troubleshooting
- 15 Warranty
- A Technical Specifications
- B Description of Event Types
- Index
Managing Test Results
62 AXS-100 Series
Printing Test Results
Printing Test Results
With a Printek 2” printer, you can print results directly from the AXS-100
Series OTDR.
Note: You cannot print ping or trace route test results from the AXS-100 Series
OTDR.
The unit communicates with the printer through its infrared port.
To print test results:
1. Select the printer (see Selecting a Printer on
page 19).
2. Once a trace has been acquired or
reopened, press Menu, select OTDR, and
then press Enter.
3. Select Print (F1/F2 key).