Manual
Table Of Contents
- Certification Information
- 1 Introducing the AXS-100 Series OTDR
- 2 Safety Information
- 3 Getting Started with Your OTDR
- 4 Customizing Your OTDR
- 5 Setting Up Your OTDR
- 6 Testing Fibers
- 7 Managing Test Results
- 8 Using Your OTDR as a Light Source
- 9 Measuring Power or Loss
- 10 Identifying Fiber Faults Visually
- 11 Inspecting Fibers with the FIP
- 12 Testing Network Connections
- 13 Maintenance
- 14 Troubleshooting
- 15 Warranty
- A Technical Specifications
- B Description of Event Types
- Index
Managing Test Results
72 AXS-100 Series
Transferring Results to a Computer
To transfer files or folders between your unit and a computer:
1. If it is not already done, install Microsoft ActiveSync 4.1 or later
(available from the installation CD).
Follow the instructions given on the screen.
2. Connect the provided USB cable to the computer (type A connector)
and your unit (type B connector).
Note: The computer and your unit do not need to be off when you connect the
cable.
IMPORTANT
You must install Microsoft ActiveSync on the computer you want to
use with your OTDR. Otherwise, you will not be able to transfer
data.
Before connecting your unit to a computer, you must install the
required software on the computer. For more information on the
installation, refer to the Release Notes on the installation CD.