Manual
Table Of Contents
- Certification Information
- 1 Introducing the AXS-100 Series OTDR
- 2 Safety Information
- 3 Getting Started with Your OTDR
- 4 Customizing Your OTDR
- 5 Setting Up Your OTDR
- 6 Testing Fibers
- 7 Managing Test Results
- 8 Using Your OTDR as a Light Source
- 9 Measuring Power or Loss
- 10 Identifying Fiber Faults Visually
- 11 Inspecting Fibers with the FIP
- 12 Testing Network Connections
- 13 Maintenance
- 14 Troubleshooting
- 15 Warranty
- A Technical Specifications
- B Description of Event Types
- Index
Measuring Power or Loss
82 AXS-100 Series
Reverting to Factory Settings
Reverting to Factory Settings
You can revert to factory settings at any time. The following items will be
reset:
³ Reference values
³ Nulling values
³ List of favorite wavelengths
³ Correction factors (reset to 1)
To revert to the factory-default settings:
1. Press Menu and select Setup > Power Meter, and then press Enter.
OR
From the Power Meter pane, press Setup (F1/F2 key).
2. Press Factory Settings (F1/F2 key).
3. Answer Yes to confirm.