User Manual

CLI Command Reference
BV10-100 and BV10-1000 43
Operation Commands
Help Commands
help
Description Displays a list of top-level CLI commands with a description of each
command.
To display context sensitive help for commands that begin with a
certain string of characters (either a complete or partial keyword), use
any of the following commands at the prompt:
 partial-keyword?
Displays a list of commands and parameters that begin with the
partial-keyword entered.
 keyword<space>?
Displays a list of possible parameters associated with the keyword.
Syntax
help
Example
bv10-100> help
List of commands:
clear Clears Statistics
console Configure Telnet/SSH/Serial/In-Band management settings
eth-oam Enables/disables Ethernet OAM
exit/logout Logout of the CLI
help Shows help information
interface1 Configures network interface
load Upgrades system image
password Changes password
ping Ping IP address
reboot Reboots the system
show Show statistics, configurations, version, system, server information
smart-loopback Configures Smart Loopback mode
twamp Configures TWAMP
udp-echo Enables/disables UDP echo
server Configures local/network/universal registry and port information