Instruction Manual

For VoD streams (uri’s):

· Choose the RTSP uri to be tested from the

Channel List in the STB

· Click on Play button of the chosen channel in

the Set Top Box. This will initiate RTSP join

request for this unicast channel. Once the

stream in this is detected it will show up in the

Test Log box as active. Repeat this process for

all channels to be tested.

To stop the test of the specific stream press button, or press either

or disconnect the Ethernet cable.

7.4 Ethernet Interface Status

The Interface panel shows the status of the

selected Ethernet link.

This information is useful to check if the link is

up or down.

The Downstream Rate give the aggregate kbits/s for the all the streams present in the link.