Owner manual

Introducing the FIP-400 Fiber Inspection Probe and ConnectorMax
2 FIP-400
Probe Tips
Probe Tips
The FIP-400 comes with two interchangeable tips but other models are
also available.
The tips included with the Fiber Inspection Probe are used to inspect flat
polish (PC) 2.5 mm connectors. One tip is for inspecting patchcords
(pigtails, male connectors) for SC, FC, and ST connectors. The other tip is
for examining SC and FC bulkhead adapters or patch panel adapters
(female).
Other tip models are available for various bulkhead adapters and
patchcord connectors including multifiber types. For more information
about tips and their use, see Fiber Inspection Probe Tip Compatibility Chart
on page 65, or visit the EXFO Web site.