User guide

Remote Control

94 FLS-2600B

Specific Commands

OUTPut:STATe?

Description This query returns the current source state.

Syntax OUTP:STAT?

Response A boolean value representing the current source state:

 0: the source is deactivated.

 1: the source is activated.

See also OUTP:STAT, OUTP:MODE, OUTP:MODE? and OUTP:ASE?

SOURce:MODE

Description This command is used to toggle between the normal and

high-resolution modes.

Syntax SOUR:MODE<wsp><mode>

Parameters The <mode> parameter is a boolean value representing the

mode state:

 0: Normal mode

 1: High-Resolution mode

Example SOUR:MODE 1

Note This command cannot be processed if your tunable laser

source is performing a sweep.