User guide

Safety Information
Tunable Laser Source 9
Electrical Safety Information
 The unit must be positioned so as not to block the ventilation holes
located on each side of the unit and to allow easy disconnection of the
power cord if any problem should occur.
 Operation of any electrical instrument around flammable gases or
fumes constitutes a major safety hazard.
Power Cable
This unit uses a three-wire power cable, which complies with international
safety standards. This cable serves as a ground when connected to an
appropriate AC power receptacle. The type of power cable supplied with
each unit is determined according to the country of destination.
Only qualified electricians should connect a new plug if needed. The color
coding used in the electrical cable depends on the cable. New plugs
should meet the local safety requirements and include the following
features:
 adequate load-carrying capacity
 ground connection
 cable clamp