User guide

Setting Sweep Parameters

Tunable Laser Source 35

Selecting the Incoming Trigger Option

The incoming trigger option allows you to synchronize your sweeps with

signals from other units.

To switch the incoming trigger option on or off:

1. Press Sweep.

2. Turn the selection dial clockwise until TRIGGER is displayed.

3. Press ENTER. The Edit marker starts blinking in the lower part of the

display.

4. Turn the selection dial clockwise or counterclockwise to turn the

Trigger option on or off.

5. Press ENTER to validate your choice and Sweep to exit the Sweep

menu.

For more information about the trigger option on your tunable laser source,

see Trigger Option Theory on page 69.

Edit