User guide

Setting Sweep Parameters

Tunable Laser Source 37

Setting the Sweep Direction

The sweep can be either unidirectional, meaning that it will only go in one

direction, or bidirectional, sweeping back and forth. This is set through the

Reverse feature of your FLS-2600B.

To set the direction of the sweep:

1. Press Sweep.

2. Turn the selection dial clockwise until REVERSE is displayed.

3. Press ENTER. The Edit marker starts blinking in the bottom left-hand

corner of the display.

4. Turn the selection dial clockwise or counterclockwise to turn the

Reverse option on or off.

5. Press ENTER to validate your choice, and Sweep to exit the Sweep

menu.

Edit