User guide

Remote Control

Tunable Laser Source 73

Changing the Baud Rate for RS-232

To change the baud rate for RS-232 transfer, you must be in RS-232 mode.

To select RS-232 mode, see Setting the FLS-2600B for Remote Control on

page 71.

To change the baud rate:

1. Press Setup.

2. Turn the selection dial clockwise until BAUD is displayed. The current

setting appears.

3. Press ENTER. The Edit marker starts blinking in the lower part of the

display.

4. Turn the selection dial to enter the rate you wish to work with.

5. Press ENTER.

6. To exit the Setup menu, press Setup.

Edit