User guide

Remote Control

Tunable Laser Source 75

Communication Parameters

Note: EOS means “End of String”. EOI means “End or Identify”.

For GPIB Communication

Ter minate Read on EOS Yes

Set EOI with EOS on Writes Yes

Type of compare on EOS 8 bits

EOS byte 0Ah

Sens EOI at end of Writes Yes

GPIB primary address See Setting the FLS-2600B for

Remote Control on page 71

GPIB secondary address None

For RS-232 Communication

EOS bytes 0Ah

Baud rate 1200/2400/4800/9600/

19200 bps

Parity None

Data bits 8 bits

Stop bits 1 bit

Flow control Software (xOn/xOff) or

None

Activation See Setting the FLS-2600B

for Remote Control on

page 71