User Guide FTB-1
Copyright © 2010–2013 EXFO Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form, be it electronically, mechanically, or by any other means such as photocopying, recording or otherwise, without the prior written permission of EXFO Inc. (EXFO). Information provided by EXFO is believed to be accurate and reliable.
End-User License Agreement You have acquired a device ("DEVICE") that includes software licensed by EXFO Inc. (EXFO) from an affiliate of Microsoft Corporation ("MS"). Those installed software products of MS origin, as well as associated media, printed materials, and "online" or electronic documentation ("SOFTWARE") are protected by international intellectual property laws and treaties.
Internet Gaming/Update Features. If the SOFTWARE provides, and you choose to utilize, the Internet gaming or update features within the SOFTWARE, it is necessary to use certain computer system, hardware, and software information to implement the features. By using these features, you explicitly authorize MS, Microsoft Corporation and/or their designated agent to use this information solely to improve their products or to provide customized services or technologies to you.
Contents Contents Certification Information ..................................................................................................... viii 1 Introducing the FTB-1 .................................................................................. 1 Main Features .........................................................................................................................1 LED Indicators Description ......................................................................................
Contents 4 Setting Up Your Unit ...................................................................................49 Adjusting Brightness .............................................................................................................49 Adjusting Microphone and Speaker Volume .........................................................................50 Recalibrating the Touchscreen ..............................................................................................
Contents 9 Accessing Your Unit Remotely ................................................................. 157 Working with Remote Desktop ...........................................................................................158 Working With TightVNC .....................................................................................................164 Configuring TightVNC Server to Start Automatically ...........................................................171 Adding Exceptions to the Firewall ...
Certification Information Certification Information North America Regulatory Statement This unit was certified by an agency approved in both Canada and the United States of America. It has been evaluated according to applicable North American approved standards for product safety for use in Canada and the United States. Electronic test and measurement equipment is exempt from FCC part 15, subpart B compliance in the United States of America and from ICES-003 compliance in Canada. However, EXFO Inc.
Certification Information If you purchased the Wi-Fi and Bluetooth option, your unit comes with an internal wireless module and antenna for which the following information applies: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
1 Introducing the FTB-1 The FTB-1 platform is a modular platform, optimized for network infrastructure construction and troubleshooting via its dedicated FTTH and Ethernet test applications. Note: In this documentation, the words “tap” and “double-tap” (related to the use of a touchscreen) replace the words “click” and “double-click”.
Introducing the FTB-1 Main Features Windows Embedded Standard operating system VPN capability Remote access to your unit (via TightVNC or Remote Desktop) Direct Web access from your unit Possibility to take screen captures PDF file generator and viewer available from your unit Easy transfer of files and folders to a USB storage device Easy updates for applications via Update Manager Front Touchscreen Keypad including standard buttons and alphanumeric keys Battery LED Func
Introducing the FTB-1 Main Features Top AC adapter/charger connector Module Fiber inspection probe port Built-in power meter (optional) VFL (optional); laser radiation emitted at this port when VFL is on Stylus Internal Wi-Fi/Bluetooth devices (optional; sticker indicates that devices are present) FTB-1 Headset/microphone port (for 2.
Introducing the FTB-1 Main Features Back Module Support Support Battery compartment 4 FTB-1
Introducing the FTB-1 LED Indicators Description LED Indicators Description There are two LED indicators located on the front panel of your unit, providing you with information about the power and battery statuses. LED FTB-1 Status Meaning Green Unit is on. Green, blinking Unit is in Standby mode. Off Unit is off or in Hibernation mode. Green Battery is fully charged. Green, blinking Battery is charging. Yellow, blinking Unit is not powered by AC and battery is low.
Introducing the FTB-1 Keypad Description Keypad Description In addition to the on-screen keyboard, your unit is equipped with a keypad which gives you access to various tools at all times. The keypad comprises arrow keys for navigation (left, right, up, down), alphanumeric keys (similar to phone keys to enter both numbers and text), and other hardware buttons. Note: Not all applications support text entry with the alphanumeric keys. The table below shows an overview of their purpose.
Introducing the FTB-1 Keypad Description Button Meaning Moves to the next group of features. Confirms last entry; equivalent of the ENTER button. Deletes the item/character. Exits or cancels last entry.
Introducing the FTB-1 Power Sources Power Sources Your unit operates with the following power sources: AC adapter/charger (connected to standard power outlet—indoor use only). Compatible car outlet adapter available upon request. One lithium-ion rechargeable battery (automatically takes over if you disconnect the AC adapter/charger). Note: When it is connected with the AC adapter/charger, the unit will function even if the battery is not present.
Introducing the FTB-1 Conventions Conventions Before using the product described in this guide, you should understand the following conventions: WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Do not proceed unless you understand and meet the required conditions. CAUTION Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
2 Safety Information WARNING Do not install or terminate fibers while a light source is active. Never look directly into a live fiber and ensure that your eyes are protected at all times. WARNING The use of controls, adjustments and procedures, namely for operation and maintenance, other than those specified herein may result in hazardous radiation exposure or impair the protection provided by this unit.
Safety Information Other Safety Symbols on Your Unit Other Safety Symbols on Your Unit One or more of the following symbols may also appear on your unit. Symbol Meaning Direct current Alternating current Both direct and alternating current The unit is equipped with an earth (ground) terminal. The unit is equipped with a protective conductor terminal. The unit is equipped with a frame or chassis terminal.
Safety Information Laser Safety Information Laser Safety Information Units with Built-In VFL Your instrument is a Class 3R laser product in compliance with standards IEC 60825-1: 2007 and 21 CFR 1040.10, except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. Laser radiation is emitted at the output port. It is potentially harmful in direct intrabeam viewing. The following label(s) indicate that the product contains a Class 3R source: Affixed to bottom panel of unit.
Safety Information Electrical Safety Information Electrical Safety Information If you need to ensure that the unit is completely turned off, disconnect the power cable and remove the battery. WARNING 14 Use the external power supply indoors only. Position the unit so that the air can circulate freely around it. Operation of any electrical instrument around flammable gases or fumes constitutes a major safety hazard.
Safety Information Electrical Safety Information WARNING FTB-1 Use only the listed and certified AC adapter/charger provided by EXFO with your unit. It provides reinforced insulation between primary and secondary, and is suitably rated for the country where the unit is sold. Use only accessories (such as the car outlet adapter, batteries, and fiber inspection probe) designed for your unit and approved by EXFO.
Safety Information Electrical Safety Information Equipment Ratings Temperature Operation unit powered by battery: 0 °C to 50 °C (32 °F to 122 °F) unit connected to AC adapter: 5 °C to 40 °C (41 °F to 104 °F) Storage unit without battery: –40 °C to 70 °C (–40 °F to 158 °F) unit with battery: –20 °C to 60 °C (–4 °F to 140 °F) AC adapter: –20 °C to 60 °C (–4 °F to 140 °F) Relative humiditya unit: 95 % non-condensing AC adapter: 10 % to 80 % non-condensing Maximum operation alti
Safety Information Electrical Safety Information IMPORTANT The operation and storage temperatures of some modules may differ from the temperatures specified for your platform. In this case, always ensure that you comply with the most restrictive conditions (either module or platform).
3 Getting Started with Your Unit Inserting and Removing Test Modules CAUTION Never insert or remove a module while the FTB-1 is turned on. This will result in immediate and irreparable damage to both the module and unit. CAUTION To avoid damaging your unit, use it only with modules approved by EXFO. To insert a module into the FTB-1: 1. Turn off your unit (Shutdown). 2. Position the unit so that its front panel rests on a flat surface such as a table. 3.
Getting Started with Your Unit Inserting and Removing Test Modules 4. Using a flat screwdriver, turn the screws (4) clockwise until they are tightened. This will secure the module into its “seated” position. Turn screws clockwise Back panel When you turn on the unit, the startup sequence will automatically detect the module.
Getting Started with Your Unit Inserting and Removing Test Modules To remove a module from the FTB-1: 1. Turn off your unit (Shutdown). 2. Position the unit so that its front panel rests on a flat surface such as a table. 3. Using a flat screwdriver, turn the screws (4) counterclockwise until they are loose. Since they are captive screws, you cannot remove them completely.
Getting Started with Your Unit Inserting and Removing Test Modules 4. Hold the module by its sides (NOT by the connectors) and pull it up. CAUTION Pulling a module by its connectors could seriously damage both the module and connector. Always pull a module by its casing.
Getting Started with Your Unit Using the Supports Using the Supports Your unit has been designed to stand either vertically (with the screen facing you), or at an angle, using the two supports. All the modules that you can use with your unit are equipped with two supports with which you can change the orientation of your unit. Once the module is inserted in your FTB-1, you can use the supports. Note: The supports ensure optimum stability to the unit during your tests.
Getting Started with Your Unit Securing Your Unit Using a Kensington Lock Securing Your Unit Using a Kensington Lock All the modules that you can use with your unit are equipped with a security slot to which you can connect an optional Kensington lock (security cable). Once the module is inserted in your FTB-1, you can secure your unit with this lock to help prevent theft. To secure your unit: Connect your lock to the security slot located on the side of your module.
Getting Started with Your Unit Using a Keyboard, Mouse or Other USB Devices Using a Keyboard, Mouse or Other USB Devices Your unit supports many USB devices. The table below lists the supported USB devices. Device Details Memory key For data transfer between your unit and a computer when you do not have access to a network. If you need information on how to transfer data using a memory key, see Managing Data on page 121.
Getting Started with Your Unit Using a Keyboard, Mouse or Other USB Devices Device Details GPS USB key (purchased from EXFO) To be able to know the position of your unit (latitude and longitude coordinates). For more information, see Retrieving the GPS Location of Your Unit on page 112. 3G USB modem key (purchased from EXFO) To access the Internet without having to connect to a Wi-Fi or an Ethernet network. For more information, see Accessing the Internet with a 3G USB Modem Key on page 106.
Getting Started with Your Unit Using a Keyboard, Mouse or Other USB Devices To use a USB device with your unit: Connect the USB device to any of the USB ports (located on top of the unit). Note: It is not necessary to turn off the unit before connecting the USB device. The software will automatically detect its presence. Your device is automatically recognized and immediately usable (provided that it uses the drivers already available on your unit).
Getting Started with Your Unit Using the On-Screen (Virtual) Keyboard Using the On-Screen (Virtual) Keyboard Your unit is equipped with an on-screen keyboard that supports multilingual features. This keyboard functions according to the keyboard settings of Windows. To use the on-screen keyboard: 1. From the unit's keypad, press the button. 2. Select the location where you want to enter text. 3. Enter the data as required. 4. Exit the location when you have finished entering data.
Getting Started with Your Unit Turning On or Off the Unit Turning On or Off the Unit There are several ways to turn off the unit, including the following: Standby: keeps the unit’s status information in memory (RAM). The next time you turn your unit on, you will quickly return to your work environment (running applications will still be running).This mode will take more battery power while the unit is off.
Getting Started with Your Unit Turning On or Off the Unit To turn on the unit: Press the On/Off button. To turn off the unit: 1. Press the On/Off button. OR On the Windows taskbar, tap Start. This will display the standard shutdown window, from which you have a choice of actions or shutdown modes. 2. Select Shutdown. To define the behavior of the power button: 1. From the Main Menu, tap Setup. 2. Double-tap Power Options. 3. Select the Advanced tab.
Getting Started with Your Unit Turning On or Off the Unit 4. From the When I press the power button on my computer list, select the desired behavior (Ask me what to do option is selected by default). 5. Tap Apply to confirm the changes, and then OK to return to Control Panel.
Getting Started with Your Unit Turning On or Off the Unit To configure your unit to automatically restart after AC power comes back: 1. From the Main Menu, tap System Settings. 2. From the System Settings window, tap Startup Applications. 3. Select the Power on the unit when AC outlet is connected or after power outage box to enable the corresponding option. OR Clear the box if you prefer that your unit does not restart automatically after AC power comes back. 4.
Getting Started with Your Unit Installing or Upgrading the Applications Installing or Upgrading the Applications All the necessary applications have been preinstalled and configured at the factory. However, you may have to upgrade some applications when new versions become available or to reinstall them. Note: Only administrator-level users can install software under Windows Embedded Standard.
Getting Started with Your Unit Installing or Upgrading the Applications IMPORTANT If you ever need to reinstall Update Manager on your unit, ensure that: The installation files for Update Manager remain on your unit. Otherwise, it will not be possible to install new versions of this application later. You choose the folder containing the Update Manager installation files carefully.
Getting Started with Your Unit Installing or Upgrading the Applications To update or reinstall Update Manager: 1. If necessary, retrieve the desired installation files from the Internet. If you do not intend to download files directly on your unit, connect a USB memory key to one of the USB ports of the computer and copy the installation files to this USB key. 2. If it is not already done, turn on your unit. 3. Exit Mini Toolbox and the modules’ applications. 4.
Getting Started with Your Unit Installing or Upgrading the Applications To install or upgrade the applications: 1. If necessary, retrieve the desired installation files from the Internet. If you do not intend to download files directly on your unit, connect a USB memory key to one of the USB ports of the computer and copy the installation files to this USB key. 2. If it is not already done, turn on your unit. If necessary, exit the modules’ applications. 3.
Getting Started with Your Unit Installing or Upgrading the Applications To create an installation USB key: 1. Turn on the computer and insert the installation DVD in the CD/DVD drive. 2. Connect a USB memory key to one of the USB ports of the computer. 3. From the Welcome window on the installation DVD, click Mini Toolbox and Tools. 4. Select the Mini Toolbox check box and click Next. 5. Follow the on-screen instructions. All the necessary components will be copied to your USB key. 6.
Getting Started with Your Unit Installing Third-Party Applications Installing Third-Party Applications Note: Only administrator-level users can install software under Windows Embedded Standard. By default, your unit is locked to prevent the installation of unwanted applications and components. However, in some cases, you may need to install third-party applications such as those allowing you to connect to the 3G/4G network of your Internet services provider.
Getting Started with Your Unit Installing Third-Party Applications To install third-party applications on your unit: 1. Unlock your unit: 1a. On the Windows taskbar, tap Start, then select All Programs > EXFO > Write Filter Manager > Write Filter Manager to start the application. Note: If you do not see the Write Filter Manager application, see Configuring Your Unit to Work with the Write Filter Manager on page 40. 1b. Tap the Unlock button. The button label switches to “Lock”. 1c.
Getting Started with Your Unit Configuring Your Unit to Work with the Write Filter Manager Configuring Your Unit to Work with the Write Filter Manager Note: Only administrator-level users can install software under Windows Embedded Standard. By default, your unit is locked to prevent the installation of unwanted applications and components.To install applications that are not part of the standard EXFO products, you will need to unlock your unit first, using the Write Filter Manager application.
Getting Started with Your Unit Configuring Your Unit to Work with the Write Filter Manager To configure your unit to work with the Write Filter Manager: 1. If necessary, turn on your unit. 2. Install the latest Platform kit: 2a. From your computer or your unit, open a Web browser and go to www.exfo.com. 2b. Log on to your My EXFO account. 2c. Under FTB-1, find the Platform kit. If you need information on how to download the kit, refer to the Readme file provided with the kit. 2d.
Getting Started with Your Unit Activating Software Options Activating Software Options The software options purchased at the same time as your unit have been activated for you already. However, if you purchase options afterwards, you will have to activate them yourself.
Getting Started with Your Unit Activating Software Options To activate the options for your unit: 1. Connect a USB memory key to one of the USB ports of your computer. 2. Copy the key file to the USB memory key. 3. Disconnect the USB key from the computer and connect it to your unit. 4. From Mini ToolBox, select the Utilities tab, then tap Options Activation.
Getting Started with Your Unit Activating Software Options 5. In the Platform Options tab, use the Browse button to locate the key file that you want to use. 6. Press Activate. The option indicator will turn into a green check mark to confirm that the option is now active. 7. Press OK to close the Option Activation window. Note: At this point, if you have used a USB key to copy your key file, you can remove it as it is not required to use your new options.
Getting Started with Your Unit Activating Software Options To activate software options for your module: 1. Connect a USB memory key to one of the USB ports of your computer. 2. Copy the key file to the USB memory key. 3. Disconnect the USB key from the computer and connect it to your unit. 4. From Mini ToolBox, select the Utilities tab, then tap Options Activation.
Getting Started with Your Unit Activating Software Options 5. In the Module Options tab, use the Browse button to locate the key file that you want to use. 6. Press Activate. The option indicator will turn into a green check mark to confirm that the option is now active. Note: You can see the supported options for the module in the Options list. 7. Press OK to close the Option Activation window.
Getting Started with Your Unit Starting Module Applications Starting Module Applications Your modules can be configured and controlled from their dedicated applications in Mini Toolbox. To start a module application: From Mini Toolbox, at the bottom of the window, press the button corresponding to the desired application. Module inserted in the platform Applications specific to the module To start the Power Meter or Probe application: From Main Menu, press Power Meter or Probe.
4 Setting Up Your Unit Adjusting Brightness To fit your work environment, you may adjust the LCD brightness. Values are kept in memory even when you turn the unit off. Note: These settings do not apply to a fiber inspection probe display. To adjust the display brightness: Press the key repeatedly to switch between brightness levels. OR 1. From the Main Menu, tap System Settings. 2. If necessary, from System Settings, tap Display & Sound. 3. Move the slider until the screen appearance is to your liking.
Setting Up Your Unit Adjusting Microphone and Speaker Volume Adjusting Microphone and Speaker Volume To fit your work environment, you may adjust the microphone and speaker volume. Values are kept in memory even when you turn the unit off. To adjust the microphone volume: 1. From the Main Menu, tap System Settings. 2. If necessary, from System Settings, tap Display & Sound. 3. Under Volume, tap the Sound Options button. 4. Select the Voice tab.
Setting Up Your Unit Adjusting Microphone and Speaker Volume 5. Under Voice recording, tap Volume. 6. Ensure that the microphone boost option is selected: 6a. From the Options menu, select Advanced Controls. 6b. Tap the Advanced button.
Setting Up Your Unit Adjusting Microphone and Speaker Volume 6c. Under Other Controls, select the 1 Microphone Boost check box. 6d. Tap Close. Note: Normally, you only have to select this option the first time that you adjust the microphone volume (the option will be selected for all other users as well). Once it is done, you can control the volume with the slider as explained at the next step. 7. Under Microphone, use the slider to adjust the sound of your microphone.
Setting Up Your Unit Adjusting Microphone and Speaker Volume To adjust the speaker volume: 1. From the Main Menu, tap System Settings. 2. If necessary, from System Settings, tap Display & Sound. 3. Under Volume, use the slider to adjust the sound of your speaker. Note: You can also select the Mute check box if you want to quickly turn off the sound. Note: You can tap the Audio Mixer button if you want to refine the volume according to the source of the sound (Master Volume and Wave controls). 4.
Setting Up Your Unit Recalibrating the Touchscreen Recalibrating the Touchscreen If you notice the touchscreen does not behave in the way it used to (for example, it is now difficult to select items) it probably needs a recalibration. The default calibration method is performed using nine points, but you can also perform a 4-point, or even a 25-point calibration (linearization) if you need more accuracy. You can stop the calibration process at any time, but the touchscreen will still need calibration.
Setting Up Your Unit Recalibrating the Touchscreen 3. From the Calibration points list, select the desired number of points for the calibration. 4. Tap Calibrate.
Setting Up Your Unit Recalibrating the Touchscreen 5. Using the stylus (or any blunt pointing device), simply press the center of the different targets that appear on the screen. Keep pressing until the application displays OK to indicate that the new parameters have been taken into account. Percentage of completion New parameters taken into account Note: If you want to stop the calibration process, press from the unit’s keypad.
Setting Up Your Unit Enabling or Disabling the Touchscreen Right-Click Feature Enabling or Disabling the Touchscreen Right-Click Feature By default, you can right-click with your touchscreen (see Right-Clicking with the Touchscreen on page 28). However, you can disable this feature if you prefer. To enable or disable the right-click of the touchscreen: 1. From the Main Menu, tap System Settings. 2. If necessary, from System Settings, tap Display & Sound. 3.
Setting Up Your Unit Enabling or Disabling the Touchscreen Right-Click Feature 4. Select the Setting tab. 5. Tap the Option button.
Setting Up Your Unit Enabling or Disabling the Touchscreen Right-Click Feature 6. From the Option tab, select the Enable Auto Right Click check box to enable the option. OR Clear the check box if you prefer to disable the right-click. 7. Tap OK to confirm the changes. 8. Tap OK once again to close the touchscreen parameters window. 9. Tap FTB-1 to return to the Mini Toolbox window.
Setting Up Your Unit Customizing the On-Screen Keyboard Customizing the On-Screen Keyboard You can customize the appearance and behavior of the on-screen keyboard. For more information on the various parameters that you can set, refer to the on-screen keyboard online help. For information on how switch from one of the available languages to another, see Selecting the Language of Operation on page 72. To customize the appearance and behavior of the on-screen keyboard: 1.
Setting Up Your Unit Customizing the On-Screen Keyboard 4. Configure the keyboard according to your needs. Note: You can access the online help related to the keyboard options by tapping the Help button. 5. When you have finished, tap Close. 6. Tap FTB-1 to return to the Mini Toolbox window.
Setting Up Your Unit Enabling or Disabling the Automatic Logon Enabling or Disabling the Automatic Logon Note: Only administrator-level users can enable or disable the automatic logon feature. You can configure your unit to automatically log on to Windows at startup (no need to select a user and enter a password). You can also disable this feature if you prefer to define separate user accounts with different user access rights and passwords.
Setting Up Your Unit Enabling or Disabling the Automatic Logon 3. Enter the desired user name (account) and the corresponding password. IMPORTANT You cannot create user accounts or modify passwords from the Automatic Logon window. The user name and password that you specify must correspond to those of an account that has been defined from User Accounts in Control Panel. 4. Tap Enable Auto Logon. 5. Tap to return to the Mini Toolbox window.
Setting Up Your Unit Enabling or Disabling the Automatic Logon To disable the automatic logon: 1. From the Main Menu, tap System Settings. 2. From System Settings, tap Automatic Logon. 3. Tap Disable Auto Logon. 4. When the application prompts you, confirm with Yes. 5. Tap to return to the Mini Toolbox window. At next startup, you will have to specify the user name and password.
Setting Up Your Unit Selecting the Startup Application Selecting the Startup Application The first time you start your unit, Mini Toolbox is displayed. However, you can configure your unit to automatically start in any of the available applications. The selected application or applications will start automatically the next time you turn on your unit after a shutdown (not in standby or hibernate mode). For more information, see Turning On or Off the Unit on page 29.
Setting Up Your Unit Selecting the Startup Application 3. Under Module application or Utility applications, select the application or applications you want to start automatically when you turn on your unit. To browse through the list Note: You can select several utility applications, but only one module application at a time. Note: If necessary, you can use the scrolling arrows located at the right of the Module application and Utility applications lists to browse through the available items.
Setting Up Your Unit Selecting the FIP Startup Application Selecting the FIP Startup Application Your unit supports both the fiber inspection probes (FIP) of the FIP-400 and FIP-400B series. By default, the unit prompts you to select the application corresponding to the FIP with which you want to work (FIP-400 or FIP-400B). If you prefer, you can configure the unit to always start your favorite application directly instead. To select the FIP startup application: 1. From the Main Menu, tap System Settings.
Setting Up Your Unit Selecting the FIP Startup Application 3. From the When I tap the Probe button list, select the desired behavior. If you want to be prompted each time to confirm the application to use, select the Ask me what to do option. Note: If the list is not available, it means that the ConnectorMax2 application is not installed on your unit. In this case, the ConnectorMax application will start automatically, enabling you to work with the probes of the FIP-400 series.
Setting Up Your Unit Configuring Network Printers Configuring Network Printers To print documents and images on a network printer, you must configure the printer first.You must know the IP address of the network printer that you want to configure (contact your network administrator). IMPORTANT Your unit does not support USB printers. Your unit only supports network printers compatible with PCL 6 (which is a “Printer Control Language”).
Setting Up Your Unit Configuring Network Printers 3. Select the HP Universal Printing PCL 6 item. 4. From the menu, select File > Printing Preferences. 5. Under Find a Printer, select Enter a Printer Address. 6. Enter the IP address of the printer that you want to configure, and then tap OK.
Setting Up Your Unit Configuring Network Printers 7. Select the Add this printer to my Printers and Faxes folder check box. 8. Tap OK to confirm. The operation can take several minutes to complete. 9. When the application prompts you, click OK to acknowledge the message. 10. If desired, modify the printer preferences to your liking. You can save the whole set of preferences for future use with the Save As button or press from the unit’s keypad to save the parameters for the current work session. 11.
Setting Up Your Unit Selecting the Language of Operation Selecting the Language of Operation You may display the user interface in one of the available languages (default is English). When you change the interface language, the corresponding keyboard is not automatically added to the list of available keyboards. You must add the desired keyboard separately if you want to enter text in a specific language (both on-screen or “real” keyboards).
Setting Up Your Unit Selecting the Language of Operation To select a new interface language: 1. From the Main Menu, tap Setup. 2. Double-tap Regional and Language Options. 3. Select the Languages tab. 4. From the Language used in menus and dialogs list, select the desired language. 5. Tap Apply to confirm the changes, and then OK to return to the Control Panel window. The new interface language will become available at the next startup.
Setting Up Your Unit Selecting the Language of Operation To add new input languages: 1. From the Main Menu, tap Setup. 2. Double-tap Regional and Language Options. 3. Select the Languages tab. 4. Under Text services and input languages, tap Details.
Setting Up Your Unit Selecting the Language of Operation 5. Under Installed services, tap Add. 6. From the Input language list, select the desired language. 7. If necessary, from the Keyboard layout/IME list, select the desired option. 8. Tap OK to confirm. 9. Repeat steps 5 to 8 for all the languages that you want to add. 10. Tap Apply to confirm the changes, and then OK to return to the Control Panel window. The added keyboards are available immediately.
Setting Up Your Unit Selecting the Language of Operation To switch from one of the available input languages to another: 1. From the unit’s keypad, press the on-screen keyboard. 2. From the on-screen keyboard, tap input languages. button to display the to display the list of available 3. From the list of languages, select the desired one. You are now ready to start entering text in the selected input language. Note: Modifying the input language does not modify the language of the interface.
Setting Up Your Unit Setting Date and Time Formats Setting Date and Time Formats The current date and time are displayed at the bottom of the Main Menu. You can modify the format in which the date and time are displayed. For information on how to adjust the date, the time, and the time zone, see Adjusting the Date, Time and Time Zone on page 80. Note: Modifying location, date and time settings will affect some of the Windows Embedded Standard settings. To set date and time formats: 1.
Setting Up Your Unit Setting Date and Time Formats 3. Select the Regional Options tab. 4. Under Standards and formats, select the desired language. This will determine the date formats available for the time as well as the short and long dates.
Setting Up Your Unit Setting Date and Time Formats 5. If necessary, refine the settings as follows: 5a. Tap Customize to display the detailed settings. 5b. Select either the Time or Date tab, depending on the settings that you want to modify. 6. Modify the settings. 7. Tap Apply to confirm the changes, and then OK to return to the Control Panel window.
Setting Up Your Unit Adjusting the Date, Time and Time Zone Adjusting the Date, Time and Time Zone Note: Only administrator-level users can adjust the date, time and time zone. The current date and time are displayed at the bottom of the main window. When saving results, the unit also saves the corresponding date and time. Note: A dedicated clock battery keeps the date and time accurate.
Setting Up Your Unit Adjusting the Date, Time and Time Zone 3. Select the Date & Time tab. 4. Modify the settings according to your needs. 5. Tap Apply to confirm the changes, and then OK to return to the Control Panel window.
Setting Up Your Unit Adjusting the Date, Time and Time Zone To change the time zone: 1. From the Main Menu, tap Setup. 2. Double-tap Date and Time. 3. Select the Time Zone tab. 4. Modify the settings according to your needs. 5. Tap Apply to confirm the changes, and then OK to return to the Control Panel window.
Setting Up Your Unit Configuring the Power Management Options Configuring the Power Management Options To get the optimum performance out of your FTB-1, your unit comes with three predefined sets of parameters (schemes) to manage power. When you do not use the unit for a while, the display may be turned off to save power. You can also configure the unit to go into standby or hibernation mode after the specified duration has expired (see Turning On or Off the Unit on page 29).
Setting Up Your Unit Configuring the Power Management Options The table below indicates the default values that are included in each of the predefined power schemes.
Setting Up Your Unit Configuring the Power Management Options To select a power scheme: 1. From the Main Menu, tap Setup. 2. Double-tap Power Options. 3. From the Power Schemes list, select the desired predefined set of parameters. 4. Tap Apply to confirm the changes, and then OK to return to the Control Panel window.
Setting Up Your Unit Configuring the Power Management Options To modify a power scheme: 1. From the Main Menu, tap Setup. 2. Double-tap Power Options. 3. From the Power Schemes list, select the predefined set of parameters that you want to modify or on which you want to base your new scheme. 4. Modify the parameters to your needs. 5. Tap Save As. If you want to modify the existing power scheme, keep the name as is, and then tap OK.
Setting Up Your Unit Configuring the Internet Options Configuring the Internet Options You can browse the Web directly from your unit, provided that you have access to an Internet connection and that the Internet options are configured properly. If you are not sure about how you should configure your Internet access, contact your network administrator. To configure the Internet options: 1. From the Main Menu, tap Setup. 2. Double-tap Internet Options. 3. Go to the Connections tab. 4.
5 Working with Your Unit Printing Documents You can print documents and images directly from your unit by using either the PDFCreator (for PDF files) or a network printer (for printing on paper). You can view the PDF files from your unit, using the SumatraPDF reader. For more information, see Viewing PDF Files on page 92. To print on a network printer, your unit must be accessible from this network by Wi-Fi or standard Ethernet.
Working with Your Unit Printing Documents To print documents: 1. Open a Web browser as follows: 1a. From Mini Toolbox, select the Utilities tab. 1b. Tap the Internet Explorer icon to open the browser. 2. Select the document that you want to print as follows: 2a. From the menu, select File > Open. 2b. Tap Browse to locate the file that you want to open. 2c. Tap Open to load the file in Internet Explorer. 2d. Tap OK to confirm. 3. From the menu, select File > Print.
Working with Your Unit Printing Documents 4. From the General tab, select the desired printer (PDFCreator by default). 5. If necessary, tap Preferences to adjust the parameters to your needs. Note: If you selected a network printer, you can save the whole set of preferences for future use with the Save As button or simply press from the unit’s keypad to save the parameters for the current work session. 6. Tap Print to start the printing process. 7. If you selected PDFCreator, proceed as follows: 7a.
Working with Your Unit Viewing PDF Files Viewing PDF Files You can view PDF files directly from your unit using the SumatraPDF reader. For more information on the available features for this reader, refer to the SumatraPDF online help. To view PDF files: 1. From Main Menu, select File Manager. 2. Browse through the folders to find the desired PDF file. 3. Double-tap the file. 4. The file opens automatically in the SumatraPDF application.
Working with Your Unit Taking Screen Captures Taking Screen Captures You can take captures of what is displayed on your screen, directly from your unit. This could be useful for troubleshooting when you need another person to have a look at a specific configuration or problem. You could also use this tool for training purposes. If you want to capture images of the fibers that you examine with the fiber inspection probe, you can use the capture feature of the probe instead.
Working with Your Unit Taking Screen Captures By default, the application generates file names as follows: IMG_[YEAR]_[MONTH]_[DAY]_[HOUR]_[MINUTE]_ [SEQUENTIAL NUMBER].bmp Example: For a screen capture taken on August 20, 2010, the file name could be: IMG_2010_08_20_13_23_01.bmp. Note: The HOUR value will appear in a 24-hour format, regardless of your unit's time settings. Note: The SEQUENTIAL NUMBER value is used to differentiate two captures that would have been taken at the same date and time.
Working with Your Unit Taking Screen Captures To take only one screen capture: From the unit's keypad, press the about 3 seconds. button and hold it down for The screen capture is automatically taken as soon as you release the button (a sound and visual effect typical of a camera taking a picture indicate that the capture is complete). Note: If a keyboard is connected to your unit, you can also press the PRINT SCREEN key. To take several screen captures: 1. From the unit's keypad, press the button. 2.
Working with Your Unit Setting Storage Parameters for Screen Captures Setting Storage Parameters for Screen Captures You can modify the file format of the screen captures as well as the destination folder, that is the folder to which the captures will be sent. By default, images are saved in .bmp format, but you can configure the application to save them in .jpg or .png format.
Working with Your Unit Setting Storage Parameters for Screen Captures To set the default image format: 1. From the Main Menu, tap System Settings. 2. If necessary, from System Settings, tap Display & Sound. 3. Under Screen snapshot, tap the Screen Snapshot Options button. 4. Under Image format, select the option corresponding to the desired format. 5. Tap OK to confirm the changes and close the window.
Working with Your Unit Setting Storage Parameters for Screen Captures To modify the destination folder: 1. From the Main Menu, tap System Settings. 2. If necessary, from System Settings, tap Display & Sound. 3. Under Screen snapshot, tap the Screen Snapshot Options button. 4. Under Destination folder, tap Browse.
Working with Your Unit Setting Storage Parameters for Screen Captures 5. From the Browse for Folder window, select the folder that you want to use to store the screen captures. If necessary, you can create a folder. 6. When your selection is made, tap OK. 7. Tap OK to confirm the changes and close the window.
Working with Your Unit Reading Audio and Video Files Reading Audio and Video Files Your unit is equipped with the VLC media player which enables you to read audio files and to view video files (such as .avi and .divx). This could be especially useful if your company wants to use multimedia files for training. The player can read files that are stored on your unit, on a USB memory key, on a network folder, or even on a Web site. IMPORTANT The VLC media player does not support the Flash format.
Working with Your Unit Reading Audio and Video Files To read video or audio files: 1. From Mini Toolbox, select File Manager. 2. Locate the video or audio file that you want to read. 3. Double-tap the file. The media player starts reading automatically if the file format is recognized. Note: You can access the online help from the Help menu of the VCL Media Player application. You will need a connection to the Internet to view the online help.
Working with Your Unit Installing Adobe Flash Player on Your Unit Installing Adobe Flash Player on Your Unit The Adobe Flash Player application is not installed on your unit by default, but you can install it if you need to read files in Flash format. IMPORTANT EXFO does not provide licenses for Adobe Flash Player. Contact Adobe to purchase a license that will entitle you to install Flash Player on your unit. To download the installation files, you will need a connection to the Internet.
Working with Your Unit Installing Adobe Flash Player on Your Unit IMPORTANT Ensure to download the latest installation package for the 32-bit version of Flash Player for Windows (operating system), and Internet Explorer (browser). You should retrieve the EXE installer component. To install Adobe Flash Player on your unit: 1. If necessary, turn on your unit. 2. From your computer or your unit, open a Web browser and go to http://www.adobe.com/special/products/flashplayer/ fp_distribution3.html. 3.
Working with Your Unit Browsing the Web Browsing the Web You can browse the Web directly from your unit, provided that you have access to an Internet connection. If you need to modify the Internet options, see Configuring the Internet Options on page 87. For more information on how to connect to the Internet using a 3G USB modem key, see Accessing the Internet with a 3G USB Modem Key on page 106. To browse the Web: 1. Open a Web browser as follows: 1a. From Mini Toolbox, select the Utilities tab. 1b.
Working with Your Unit Browsing the Web 2. Enter the desired Web address in the address bar and tap the button (located at the right of the address bar) to start browsing. 3. Close the window to return to the Utilities tab.
Working with Your Unit Accessing the Internet with a 3G USB Modem Key Accessing the Internet with a 3G USB Modem Key Note: Only administrator-level users can install software under Windows Embedded Standard. However, when the installation is complete, all users will have the possibility to access the Internet using a USB modem key. Your can connect an optional 3G USB modem key to your unit to have a wireless access to the Internet.
Working with Your Unit Accessing the Internet with a 3G USB Modem Key IMPORTANT Only the Sierra Wireless 319U keys provided by EXFO are supported on your unit. Before using the USB modem key for the first time, you must install the most recent System Upgrade and Platform kits for your unit. To do this, you will need a standard USB memory key and a computer with an Internet access.
Working with Your Unit Accessing the Internet with a 3G USB Modem Key 3. Install the retrieved kits on your unit: 3a. Install the System Upgrade. For more information, refer to the installation procedure provided with the kit. 3b. Once the installation of the System Upgrade is complete, install the Platform kit on your unit. For more information, refer to the Readme file provided with the kit.
Working with Your Unit Accessing the Internet with a 3G USB Modem Key 4. Follow the on-screen instructions. You will know that the installation is complete when the AirCard Watcher application starts. 5. Close the AirCard Watcher application. 6. Disconnect the USB modem key from your unit. 7. Reconnect the USB modem key to your unit so that it can be detected properly. All users are now ready to start working with the USB modem key as explained hereafter.
Working with Your Unit Accessing the Internet with a 3G USB Modem Key To work with a 3G USB modem key: 1. If necessary, turn on your unit and wait for the startup sequence to complete. 2. If necessary, insert the SIM card into the USB modem key. For more information, refer to the documentation that came with your modem key. 3. If necessary, connect the USB modem key to one of the USB ports of your unit. 4. From the Windows desktop, double-tap the AirCard Watcher icon to start the application.
Working with Your Unit Accessing the Internet with a 3G USB Modem Key 5. Once the AirCard Watcher application starts, tap Connect to establish a connection with the mobile network. As soon as the connection is established, you are ready to browse the Web. Note: If you want to customize the behavior and appearance of the AirCard Watcher application, refer to the online help provided with the application (available by tapping ? from the toolbar).
Working with Your Unit Retrieving the GPS Location of Your Unit Retrieving the GPS Location of Your Unit With the optional GPS USB key and the provided GPS utility, you can retrieve the latitude and longitude coordinates of your unit as well as the date and time of the reading. You will see either the last known coordinates or the current ones, depending on if the GPS key can establish a connection with the GPS satellites or not.
Working with Your Unit Retrieving the GPS Location of Your Unit To upgrade your unit to the latest System Upgrade and Platform components: 1. If necessary, turn on your unit. 2. Retrieve the latest System Upgrade and Platform kits: 2a. From your computer or your unit, open a Web browser and go to www.exfo.com. 2b. Log on to your My EXFO account. 2c. Under FTB-1, find the System Upgrade and Platform kits. If you need information on how to download the kits, refer to the Readme files provided with the kits.
Working with Your Unit Retrieving the GPS Location of Your Unit IMPORTANT Always turn your unit on before connecting the GPS USB key to it. Otherwise, the GPS key may not be detected properly. To retrieve the GPS location of your unit: 1. Go outdoors with your unit. 2. If necessary, turn on your unit and wait for the startup sequence to complete. 3. Ensure that the GPS USB key is connected to your unit.
Working with Your Unit Retrieving the GPS Location of Your Unit 4. From Mini Toolbox, select the Utilities tab, then tap GPS Coordinates Viewer. The GPS coordinates are displayed. Status of the connection Note: If you see “GPS not detected” at the bottom of the GPS Coordinates window, this means that the GPS key is not connected to your unit. Once the GPS key is connected properly, the utility will display “Searching”.
Working with Your Unit Using the Calculator Using the Calculator You can use Microsoft Calculator directly from your unit. To use the Calculator: 1. From Mini Toolbox, select the Utilities tab. 2. Tap Calculator. Using the Text Editor You can use Microsoft Notepad directly from your unit. To use the text editor: 1. From Mini Toolbox, select the Utilities tab. 2. Tap Notepad. Accessing Other Tools Your unit comes with free tools such as Wireshark to help you troubleshoot networks.
6 Using the Optional Built-In Power Meter and VFL The FTB-1 can be equipped with an optical power meter to measure absolute power (dBm or W) or insertion loss (dB). The power meter can detect modulated signals (1 kHz, 2 kHz, and 270 Hz). The FTB-1 can also include a visual fault locator (VFL) to inspect or identify fibers. If you have purchased a module with an inline power meter, you can also take measurements with this power meter instead of using the built-in power meter.
Using the Optional Built-In Power Meter and VFL To access the built-in power meter or the VFL: 1. From Mini Toolbox, tap Power Meter and VFL. 2. If the module that you are using with your platform is equipped with an inline power meter, tap the item corresponding to the power meter that you want to use. Note: If you want to use the built-in VFL, select either Power Meter and VFL or VFL, depending on the configuration of your unit.
7 Inspecting Fibers with a Probe The fiber inspection probe (FIP) is used to find dirty or damaged connectors by displaying an enlarged view of the connector surface. You can connect a probe to your unit to view fiber ends. Your unit supports both the probes of the FIP-400 and FIP-400B series. Fiber inspections are made using the ConnectorMax (FIP-400) or the ConnectorMax2 (FIP-400B) application, depending on the probe that you use.
Inspecting Fibers with a Probe 3. If the unit prompts you to select an application, tap the button corresponding to the probe that you want to use to start the corresponding application. Note: If you have not updated the ConnectorMax product lately, the ConnectorMax2 application may not be installed on your unit. In this case, you will not be presented with a choice of applications. The ConnectorMax application will start automatically, enabling you to work with the probes of the FIP-400 series.
8 Managing Data You can copy, move, rename, delete files and folders directly on your unit. You can transfer files from your unit to a USB memory key or a computer. You can also transfer data from a storage device or a computer to your unit. Your unit is equipped with the following ports and devices for data transfer: FTB-1 Two USB 2.0 ports to connect a memory key or a USB to RS-232 adapter (see Using the USB to RS-232 Adapter on page 136.
Managing Data To view the free disk space on your unit: 1. From Main Menu, tap System Info. 2. Select Platform. The free disk space is displayed next to the Available Flash on “D:\ (APP)” item. 3. When you have finished, tap OK to close System Information. To manage files or folders on your unit only: From Main Menu, select File Manager.
Managing Data To transfer files or folders between your unit and a USB memory key: 1. Connect the USB memory key to the USB port. 2. From Main Menu, select File Manager. The list of available drives and folders should include the memory key (Removable Disk). You can now manage your files and folders as you wish. Note: If you do not see the memory key, close File Manager and reopen it. You can also use the Refresh option from the View menu. 3. When you have finished, remove the memory drive.
Managing Data Transferring Data via Bluetooth Transferring Data via Bluetooth If your unit is equipped with the optional Bluetooth device (internal), you can transfer data between your unit and a computer using the Bluetooth technology. By default, both the Bluetooth and Wi-Fi devices are enabled, but not connected to a network. If you have disabled the devices, you must enable them before trying to transfer data via Bluetooth (see Enabling or Disabling the Bluetooth and Wi-Fi Devices on page 141).
Managing Data Transferring Data via Bluetooth To transfer data via Bluetooth: 1. Configure your unit as follows: 1a. From the Main Menu, tap Setup. 1b. Double-tap Bluetooth Devices. 1c. From the Options tab, under Discovery, select the Turn discovery on check box. 1d. Ensure that the Allow Bluetooth devices to connect to this computer check box is selected. 1e. Tap OK to confirm.
Managing Data Transferring Data via Bluetooth 2. Configure the computer as follows: 2a. On the computer, from Control Panel, double-click Bluetooth Devices. 2b. From the Options tab, under Discovery, select the Turn discovery on check box. 2c. Ensure that the Allow Bluetooth devices to connect to this computer check box is selected. 2d. Tap OK to confirm. 3. On the computer, click the Bluetooth icon (located on the taskbar) and select Receive a file. 4.
Managing Data Transferring Data via Bluetooth 5. Tap Bluetooth File Transfer Wizard. 6. From the Welcome window, tap Next. 7. Select Send a file and tap Next.
Managing Data Transferring Data via Bluetooth 8. Select the computer to which you want to transfer data as follows: 8a. Tap Browse. 8b. Select the desired computer, and then tap OK to confirm.
Managing Data Transferring Data via Bluetooth 9. If you want to use a passkey, select the corresponding check box and enter the passkey. When you have finished, tap Next. 10. Tap Browse to select the file that you want to send to the computer. 11. Select the file, tap Open to confirm, and then Next.
Managing Data Transferring Data via Bluetooth 12. On the computer, when the application prompts you, allow the connection and enter the passkey if necessary. Note: Once you have established a secured connection using a passkey, this passkey is kept in memory both on your unit and on the computer until you remove this connection (Setup > Bluetooth Devices > Devices) or change the passkey. 13. On the computer, click Finish. 14.
Managing Data Connecting to a Wireless Network Connecting to a Wireless Network If your unit is equipped with the optional Wi-Fi device (internal), you can connect to a wireless network and benefit from all resources that are available on this network. You can transfer data exactly as you would do from an Ethernet network. By default, both the Bluetooth and Wi-Fi devices are enabled, but not connected to a network.
Managing Data Connecting to a Wireless Network 2d. Ensure that the File and Printer Sharing item is selected. 2e. Tap OK to confirm. 3. On your unit, from Mini ToolBox, select the Utilities tab. 4. Tap WiFi Connect. 5. Tap OK to acknowledge the message on how to display the list of wireless networks.
Managing Data Connecting to a Wireless Network 6. Double-tap Wireless Network Connection. 7. If your unit is already connected to a wireless network, tap View Wireless Networks to display the list of wireless networks.
Managing Data Connecting to a Wireless Network 8. From the Wireless Network Connection window, select the wireless network to which you want to connect. 9. Tap Connect.
Managing Data Connecting to a Wireless Network 10. If the network is protected by a network key (password) enter it in the corresponding boxes and tap Connect. Note: Since all networks are different, you may also need to configure other parameters before being able to transfer data via Wi-Fi. For information on the configuration specific to your network, contact your network administrator. As soon as the connection is established, you can start working with the selected wireless network.
Managing Data Using the USB to RS-232 Adapter Using the USB to RS-232 Adapter If you want to transfer data between your unit and a device that is only equipped with RS-232 (serial) ports, you have to use a USB/RS-232 adapter. IMPORTANT Only the USB/RS-232 adapters sold by EXFO are supported. Once the adapter has been detected, the unit assigns it a COM port number (values begin at COM 3). This COM port number is kept in memory even when you turn the unit off.
Managing Data Using the USB to RS-232 Adapter To use the USB/RS-232 adapter: 1. Turn on both the unit and the serial device. 2. Connect as shown. You can connect the USB end of the adapter to any of the USB ports. USB end Serial end Serial device USB/RS-232 adapter FTB-1 Note: If the device that you want to use is a computer (not equipped with USB ports) you may want to use a null-modem serial cable as an “extension cable” between the device and the USB/RS-232 adapter.
Managing Data Using the USB to RS-232 Adapter 3. From your unit, retrieve the COM port of the adapter as follows: 3a. On your unit, from the Main Menu, select Setup. 3b. Double-tap Device Manager. 3c. Expand the Ports (COM & LPT) list to retrieve the COM port number that has been assigned to the adapter and write it down. 3d. Close the Device Manager.
Managing Data Using the USB to RS-232 Adapter 4. From your unit, configure the communication parameters as follows: 4a. On your unit, from Mini ToolBox, select the Utilities tab, then tap PuTTY. 4b. Configure the parameters. Tree view From the tree view, select Connection > Serial and set the parameters as needed. Ensure that the COM port that you specify corresponds to the one that you wrote down at step 3c.
Managing Data Using the USB to RS-232 Adapter 5. From the device, set the communications parameters. IMPORTANT To be able to establish a communication between the unit and the device, you must set the following parameters to the same values as those defined on your unit: Speed Data bits Stop bit Parity Flow control Note: The COM port number that you set on your device will probably differ from the one that you used on your unit. 6.
Managing Data Enabling or Disabling the Bluetooth and Wi-Fi Devices Enabling or Disabling the Bluetooth and Wi-Fi Devices By default, both the Wi-Fi and Bluetooth devices are enabled on units that are equipped with the corresponding options. If you do not intend to transfer files via Bluetooth or to work with a wireless network for a certain period of time, you may wish to disable the devices to extend battery life. As soon as you disable the Wi-Fi device, the Bluetooth is automatically disabled as well.
Managing Data Enabling or Disabling the Bluetooth and Wi-Fi Devices 3. Select Wireless Network Connection. 4. From the File menu, select Enable or Disable, according to your needs.
Managing Data Transferring Files with the USB Data Mover Application Transferring Files with the USB Data Mover Application With the USB Data Mover application, you can copy folders and files from your unit to a USB storage device quickly. You can retrieve files from the predefined source folders or specify your own folders.
Managing Data Transferring Files with the USB Data Mover Application Each time you copy data, the application creates a folder on the storage device. This folder will contain the copied files and subfolders (original folder structure as well as folder and file names are kept). The application generates folder names as follows: [YEAR]-[MONTH]-[DAY]_[HOUR]-[MINUTE]-[SECOND] Example: For a copy operation requested on September 20, 2013, the folder name could be: 2013-09-20-13_23-01-45.
Managing Data Transferring Files with the USB Data Mover Application 4. Select or clear the check boxes to adjust the folder selection to your needs. 5. If necessary, under Destination media, select the desired USB storage device. 6. Tap Copy. The files will remain on your unit after the transfer. 7. When you have finished, tap application.
Managing Data Transferring Files with the USB Data Mover Application To manage the list of source folders: 1. From Mini Toolbox, select the Utilities tab. 2. Tap USB Data Mover. 3. Tap User Preferences.
Managing Data Transferring Files with the USB Data Mover Application 4. If you want to add your own folders to the list of source folders, proceed as follows: 4a. Tap Add a Folder. 4b. Select the desired folder, and then tap OK.
Managing Data Transferring Files with the USB Data Mover Application 5. If you want to remove folders from the list of source folders, proceed as follows: 5a. Select the folder that you want to remove. 5b. Tap Remove Folder. Note: The application will not prompt you to confirm the removal of the folder from the list. 6. When you have finished, tap Close. Your changes are reflected automatically. All the newly added folders are selected by default. 7. Tap 148 to exit the USB Data Mover application.
Managing Data Connecting to a VPN from Your Unit Connecting to a VPN from Your Unit Note: Only administrator-level users can install software under Windows Embedded Standard. However, when the installation is complete, all users will have the possibility to connect to a VPN from the unit. You can connect to a Virtual Private Network (VPN) from your unit if you install one of the supported VPN clients (applications).
Managing Data Connecting to a VPN from Your Unit IMPORTANT EXFO does not provide any VPN clients. You must provide the installation files for one of the supported VPN clients yourself. The complete list is available from the VPN Installer application. EXFO cannot guarantee that any VPN client other that those listed will work properly on your unit. To retrieve the list of supported VPN clients: 1. On your unit, from Mini ToolBox, select the Utilities tab. 2. Tap VPN Installer. 3.
Managing Data Connecting to a VPN from Your Unit 4. All the supported VPN clients appear on the Supported software and versions list. You can write down this list and contact your network administrator to get the installation files. 5. Tap Cancel to close the VPN Installer. You are ready to go to the procedure explaining how to install the VPN client on your unit.
Managing Data Connecting to a VPN from Your Unit CAUTION To ensure the proper installation of your VPN client, NEVER attempt to install it manually. Always use the VPN Installer. DO NOT restart your unit during the installation even if you are prompted to do so. Otherwise, the VPN client will not be installed properly. The EXFO VPN Installer will restart your unit automatically to complete the installation. If you updated the VPN client by mistake, see Solving Common Problems on page 195.
Managing Data Connecting to a VPN from Your Unit To install a VPN client on your unit: 1. If the date on your unit does not correspond to the current date, modify it (see Adjusting the Date, Time and Time Zone on page 80). 2. Retrieve the installation files on your unit as follows: 2a. On your unit, create a folder on the Windows desktop. 2b. Copy the installation files (from a USB key or a folder network) to the newly created folder. 3. On your unit, from Mini ToolBox, select the Utilities tab. 4.
Managing Data Connecting to a VPN from Your Unit 5. From the VPN Installer first window, read the information. When you have finished, tap Continue. 6. From the Supported software and versions list, select the entry corresponding to the VPN client for which you have retrieved installation files at step 2. Tap Continue.
Managing Data Connecting to a VPN from Your Unit 7. From the VPN Installer, select the corresponding setup file using the Browse button. IMPORTANT To avoid installation problems, ensure that the installation files are available from the Windows desktop of your unit. Never use installation files directly from a USB key. Note: Depending on the VPN client that you have selected previously, you may have two installation files to select (two Browse buttons instead of one).
Managing Data Connecting to a VPN from Your Unit To connect to a VPN from your unit: Start the VPN client and follow the on-screen instructions. If you are not sure about the information that you should provide, contact your network administrator.
9 Accessing Your Unit Remotely You can access your unit remotely from a computer using either the Remote Desktop Connection or TightVNC Client applications. The table below presents the differences between the two applications. Characteristic Remote Desktop Connection TightVNC Client Type of connection Direct between the unit and the computer; only one user can be connected to the unit at a time. Not exclusive; several users can be connected to the unit at the same time (sharing the same session).
Accessing Your Unit Remotely Working with Remote Desktop Working with Remote Desktop By default, all the accounts with administrator rights can use Remote Desktop. If you want accounts with limited rights to be able to use Remote Desktop as well, you must specifically grant them access. You can also configure the unit to prevent users from accessing it remotely.
Accessing Your Unit Remotely Working with Remote Desktop To access your unit remotely with Remote Desktop: 1. Connect both the computer and your unit to the same network and make sure they can “see” each other as network restrictions might prevent them from communicating. If you want to use an Ethernet network, connect an RJ-45 (network) cable to the unit’s RJ-45 port located on its top panel. If you want to use a wireless network, see Connecting to a Wireless Network on page 131.
Accessing Your Unit Remotely Working with Remote Desktop 6. In the Connecting to Remote Desktop window, in the Computer list, type the IP address of the unit that you wrote down at step 4. 7. Click Connect. 8. When the application prompts you, enter your user name and password. 9. Click OK to open the session. Allowing Users with Limited Accounts to Use Remote Desktop By default, only the accounts with administrator rights can use Remote Desktop.
Accessing Your Unit Remotely Working with Remote Desktop To allow a user with limited accounts to use Remote Desktop: 1. On your unit, from the Main Menu, select System Settings. 2. From System Settings, tap Remote Session. 3. Ensure that Allow remote connections to this unit (from computer using Remote Desktop client application) is selected. 4. From the list of users, select the boxes corresponding to the users to whom you want to grant access. 5. Tap FTB-1 to return to the Mini Toolbox window.
Accessing Your Unit Remotely Working with Remote Desktop Preventing Users from Connecting with Remote Desktop You can also configure the unit to prevent users to access it using Remote Desktop. However, all users having administrator user rights will be able to modify this setting at any time. To prevent users from connecting to the unit using Remote Desktop: 1. On your unit, from the Main Menu, select System Settings. 2. From System Settings, tap Remote Session. 3.
Accessing Your Unit Remotely Working with Remote Desktop Restarting or Turning Off Your Unit While Working with Remote Desktop In some cases, you may need to restart or shutdown your unit while you are controlling it remotely. To restart or turn off your unit with Remote Desktop: 1. Close all applications, including Mini Toolbox. 2. On the taskbar, click Start, then select Run. 3. If you want to restart your unit, in the Open box, enter Shutdown -r.
Accessing Your Unit Remotely Working With TightVNC Working With TightVNC The control of your unit with TightVNC requires the TightVNC Server (already installed on your unit) and the TightVNC Client Viewer (that you must install on your computer). The first time you start the TightVNC Server on your unit, the application will prompt you to define passwords. Once these passwords are defined, you are now ready to connect to your unit using the TightVNC Client (on your computer).
Accessing Your Unit Remotely Working With TightVNC CAUTION Be very careful if you use TightVNC to transfer files between a computer and your unit (TightVNC Server). Transfer from a computer to your unit: If the transfer is interrupted, all files on your unit having the same name as those on the computer WILL BE DELETED. However, the files on the computer will remain available.
Accessing Your Unit Remotely Working With TightVNC Configuring the TightVNC Server The TightVNC Server is already installed on your unit. You must configure passwords before establishing a connection between a computer and your unit. To configure the TightVNC Server: 1. If you have configured TightVNC Server to start automatically when you turn on your unit, go directly to step 2. Otherwise, from Mini Toolbox, select the Utilities tab, then tap TightVNC Server Start. 2. Select the Server tab.
Accessing Your Unit Remotely Working With TightVNC 3. In the Primary password and View-only password boxes, type the desired passwords. Note: The two passwords are independent of each other. They do not have to be identical. 4. Tap Apply, and then OK.
Accessing Your Unit Remotely Working With TightVNC Installing the TightVNC Viewer on a Client Computer If the TightVNC Viewer is not already installed on your computer, you can install it with the DVD that came with your FTB-1. To install the TightVNC Viewer on your computer: 1. Insert the installation DVD into the CD/DVD drive of your computer. 2. From the DVD Main Menu, click Explore this DVD. 3. Open the Utilities folder, and then copy the VNC Client folder. 4.
Accessing Your Unit Remotely Working With TightVNC Connecting to Your Unit with TightVNC Once the TightVNC Viewer is installed on your computer, you are ready to access your unit remotely. To connect to your unit with TightVNC: 1. Connect both the computer and your unit to the same network and make sure they can “see” each other as network restrictions might prevent them from communicating.
Accessing Your Unit Remotely Working With TightVNC 5. If you have configured TightVNC Server to start automatically when you turn on your unit, go directly to step 6. Otherwise, from Mini Toolbox, select the Utilities tab, then tap TightVNC Server Start. 6. From your computer, double-click the TightVNC Viewer shortcut on your desktop. 7. In the VNC Server list, type the IP address of your unit that you wrote down at step 4. 8. Click Connect.
Accessing Your Unit Remotely Configuring TightVNC Server to Start Automatically Configuring TightVNC Server to Start Automatically Note: Only administrator-level users can configure the TightVNC Server to start automatically. By default, the TightVNC Server is not started automatically when you turn on your unit. However, you can modify this setting. This is especially useful if you need to remotely connect to your unit without having the unit close at hand.
Accessing Your Unit Remotely Configuring TightVNC Server to Start Automatically To configure TightVNC server to start automatically: 1. On your unit, from the Main Menu, select System Settings. 2. Tap Remote Session. 3. Select the Start TightVNC Server automatically at unit startup check box. 4. When the unit prompts you, tap Yes to configure the TightVNC passwords (and other parameters) if necessary. The new parameters are now taken into account.
Accessing Your Unit Remotely Adding Exceptions to the Firewall Adding Exceptions to the Firewall Note: Only administrator-level users can add exceptions to the firewall. Your unit is protected by the Microsoft firewall to prevent unauthorized access when it is connected to a network or to the Internet. The firewall has been preconfigured so that all the applications that come with your unit work properly. However, you can allow other applications to access the network or the Internet by adding exceptions.
Accessing Your Unit Remotely Adding Exceptions to the Firewall 3. Select the Exceptions tab. 4. Tap Add Program to add any application that you need. 5. When you have finished, tap OK (located at the bottom of the dialog box) to confirm the changes and return to the Control Panel window.
10 Testing Network Connections Note: This function is available with the optional IPT software package only. The two most common basic tests widely used in networking are the ping test and the trace route test. With these tests, you can ensure that IP packets travel as expected from a local host to a remote host and vice versa.
Testing Network Connections Performing a Ping Test To perform a ping test: 1. From Mini Toolbox, select the Test Tools tab, then tap IP Tools. 2. From IP Testing Tools, select the Ping tab.
Testing Network Connections Performing a Ping Test 3. Enter a URL or an IP address to reach. You can tap the Default button to use the unit's default ping address. The default value cannot be configured. 4. Set the other parameters: Number of packets to send Packet size Timeout limit TTL limit Clear the Allow fragmentation check box if you prefer sending complete packets to the host. 5. Tap the Start button. You can stop a ping test at any time by tapping the Stop button.
Testing Network Connections Performing a Trace Route Test Performing a Trace Route Test The trace route test is used to evaluate the average number of nodes that are required to reach the final host. It is often used to troubleshoot networks (identify accesses blocked by firewalls or routing problems). This trace route test utility enables you to: Enter a remote host address. Set the maximum time allowed for a packet to reach the remote host.
Testing Network Connections Performing a Trace Route Test To perform a trace route test: 1. From IP Testing Tools, select the Trace Route tab. 2. Enter an URL or an IP address to reach. You can tap the Default button to use the unit's default trace route address. The default value cannot be configured. 3. Set the other parameters: Timeout limit TTL limit Select or clear the Resolve IP addresses check box if you want to get the host name for the corresponding IP address of nodes. 4.
Testing Network Connections Exporting the Results Exporting the Results When a test is complete, you can export the results of the current test page. If you want to keep your results for future use, you must export them because result files cannot be opened directly from your unit. Results are sent to a text file. Fields are separated by the “TAB” character to simplify the importation into a Microsoft Excel worksheet.
11 Maintenance To help ensure long, trouble-free operation: Always inspect fiber-optic connectors before using them and clean them if necessary. Keep the unit free of dust. Clean the unit casing and front panel with a cloth slightly dampened with water. Store unit at room temperature in a clean and dry area. Keep the unit out of direct sunlight. Avoid high humidity or significant temperature fluctuations. Avoid unnecessary shocks and vibrations.
Maintenance Cleaning Detector Ports Cleaning Detector Ports Regular cleaning of detectors will help maintain measurement accuracy. IMPORTANT Always cover detectors with protective caps when unit is not in use. To clean detector ports: 1. Remove the protective cap and adapter (FOA) from the detector. 2. If the detector is dusty, blow dry with compressed air. 3. Being careful not to touch the soft end of the swab, moisten a cleaning tip with only one drop of isopropyl alcohol.
Maintenance Cleaning the Touchscreen of Your FTB-1 Unit Cleaning the Touchscreen of Your FTB-1 Unit Clean the touchscreen with a soft, non-abrasive cloth, such as one used for cleaning reading glasses, dampened with water. CAUTION Using anything else than water can damage the special coating of the touchscreen.
Maintenance Recharging the Main Battery IMPORTANT Batteries are not charged at the factory. Install the battery compartment on your unit (see Replacing Batteries on page 188), and then fully charge the battery before using the unit for the first time. The battery is fully charged after a few hours or when the battery LED indicator stops flashing. The time required to charge batteries depends on various factors such as the type of modules currently in use and the ambient temperature.
Maintenance Recalibrating the Battery Recalibrating the Battery Depending on the way the unit is used, after a while, the charge status icon may no longer correspond to the actual power level of the battery (for example, the battery level icon indicates that power level is sufficient, but unit turns off because battery is too weak). A complete calibration cycle will be necessary.
Maintenance Recalibrating the Battery To recalibrate the batteries: 1. From the Main Menu, select Setup, and then double-tap Battery Calibration. 2. Connect the AC adapter/charger to your unit.
Maintenance Recalibrating the Battery 3. Tap the Start Calibration button (the Stop Calibration button will become available). Once calibration is complete, the Start Calibration button becomes available again.
Maintenance Replacing Batteries Replacing Batteries Your unit uses batteries with built-in protection that have been especially designed for EXFO. For this reason, you can only replace the main battery with a battery designed for your FTB-1. You can purchase new batteries and empty battery compartments (also known as “battery covers”) from EXFO.
Maintenance Replacing Batteries 2a. Position the unit so that its front panel rests on a flat surface such as a table. 2b. Lift the mobile part of the battery compartment screws and turn the screws counterclockwise until the compartment is loose. Since they are captive screws, you cannot remove them completely. Turn screws counterclockwise Battery compartment CAUTION Shocks and drops may have loosened the battery inside its compartment.
Maintenance Replacing Batteries 3. If necessary, release the battery from its compartment as follows: 3a. Position the battery compartment so that the battery is facing you. 3b. Pull on the battery tab to free the battery from its socket. You are now ready to replace the battery. To replace (or install) the main battery: 1. If you do not have a replacement battery, contact EXFO to purchase a new one. 2. Position the battery compartment so that you can view its hollow part.
Maintenance Replacing Batteries 3. Install the battery as follows: 3a. Insert the new battery, respecting the polarity. You can use the image appearing inside the compartment as a guide. Battery poles Note: When the battery is correctly positioned, its poles should be facing upwards and be placed on the same side as shown on the illustration in the battery compartment. 3b. Apply slight pressure to the battery to secure it in place. 4. Position the battery compartment so that you can see the two screws.
Maintenance Recalibrating the Unit Recalibrating the Unit EXFO manufacturing and service center calibrations are based on the ISO/IEC 17025 standard (General Requirements for the Competence of Testing and Calibration Laboratories). This standard states that calibration documents must not contain a calibration interval and that the user is responsible for determining the re-calibration date according to the actual use of the instrument. The validity of specifications depends on operating conditions.
Maintenance Recycling and Disposal (Applies to European Union Only) To help you with calibration follow-up, EXFO provides a special calibration label that complies with the ISO/IEC 17025 standard and indicates the unit calibration date and provides space to indicate the due date.
12 Troubleshooting Solving Common Problems Problem Unit does not turn on. Cause Battery is discharged. Solution Charge the battery. Replace the battery with a fully charged one. Connect the unit to an external power supply using the AC adapter/charger. Unit is not connected to an external power supply. Connect the unit to an external power supply using the AC adapter/charger. External power supply Make sure the external power supply is disconnected. is connected at both ends.
Troubleshooting Solving Common Problems Problem Cause --The System Settings window is not displayed correctly when you control the unit via Remote Desktop. Solution Ensure that the System Settings window is closed before you connect to the unit with Remote Desktop. OR If you are already connected to the unit with Remote Desktop, close the System Settings window, and then reopen it. Some applications are not displayed correctly when you connect to the unit with Remote Desktop.
Troubleshooting Solving Common Problems Problem Cause Solution One of the applications is not responding. Press and hold it down until the shutdown menu appears, then select Turn off. Turn the unit on again to reset it. Impossible to calibrate Screen calibration is the touchscreen via the very poor. calibration application in System Settings. Press and hold it down until the shutdown menu appears, then select Turn off. Turn on the unit.
Troubleshooting Solving Common Problems Problem Batteries are not charging. Cause Solution Ambient temperature is too high or too low. Ensure that the temperature in the location where you charge the batteries is within the specifications. AC adapter/charger is not connected properly. Ensure that the adapter/charger is connected both to your unit and the power outlet. Unit switches to standby Power schemes are or hibernation mode not defined correctly. unexpectedly.
Troubleshooting Solving Common Problems Problem Cause The 3G USB modem key There is no SIM is connected, but you card in the USB are not able to access modem key. the Internet. The FTB-1 unit is not up to date. Solution Insert the SIM card into the USB modem key. For complete instructions, refer to the documentation that came with your modem key. Ensure that the latest System Upgrade and Platform kits are installed on your unit before connecting your USB modem key.
Troubleshooting Solving Common Problems Problem Cause Solution --- Restart your unit and start a new installation. If the problem persists, restore your unit. To do so, see the Restoring Your Unit to Normal Operation section. You want to change your --VPN client for another client. Restore your unit. To do so, see the Restoring Your Unit to Normal Operation section. Problems or errors occurred during the installation of the VPN client. OR You need to remove the VPN client from your unit.
Troubleshooting Restoring Your Unit to Normal Operation Restoring Your Unit to Normal Operation Your FTB-1 is set to start using the standard Windows startup sequence.
Troubleshooting Restoring Your Unit to Normal Operation To navigate in the various windows using the unit’s keypad: Use up/down and left/right arrows. You can also press of the TAB key). Press to go to the next group of features (equivalent to select an item (equivalent of the ENTER key). To restore the system partition: 1. Turn on the FTB-1. 2. While the system is displaying the boot menu (3 seconds), press the down arrow from the unit’s keypad to select the Maintenance and recovery mode.
Troubleshooting Restoring Your Unit to Normal Operation 4. From the main window, select Restore system partition from an image, then tap Next. 5. If you want to revert your unit to its initial state (most cases), select Factory recovery image. OR If you prefer to use an image file (provided by customer service, for example), select .wim file and use the Browse button to locate the file.
Troubleshooting Restoring Your Unit to Normal Operation 6. Tap Next to proceed to the next step. 7. Tap Next to start the restoration process. The unit will restart upon completion of the process.
Troubleshooting Restoring Your Unit to Normal Operation To retrieve data from the D drive: 1. Turn on the FTB-1. 2. While the system is displaying the boot menu (3 seconds), press the down arrow from the unit’s keypad to select the Maintenance and recovery mode. OR Press the ARROW DOWN key on the keyboard (if you have connected one). 3. Press from the unit’s keypad or ENTER on your keyboard to confirm your choice. Note: The touchscreen becomes effective at this point. 4.
Troubleshooting Restoring Your Unit to Normal Operation 5. Select the files to back up. A check mark indicates a selection of the entire folder (subfolders and files). A shaded check box indicates that not all of the files of subfolders are selected. 6. If the USB device you want to use is not connected to the unit, connect it now so that the system can find it. Tap Next.
Troubleshooting Restoring Your Unit to Normal Operation 7. Select the USB device onto which you want to save the data from the list of available devices. Note: If you have forgotten to connect the USB device at this point and that it does not show up in the list, tap Back, connect the device, then tap Next to return to this window. 8. Tap Next to start the file copy process. A progress bar indicates which files are being copied.
Troubleshooting Restoring Your Unit to Normal Operation To verify disk integrity: 1. Turn on the FTB-1. 2. While the system is displaying the boot menu (3 seconds), press the down arrow from the unit’s keypad to select the Maintenance and recovery mode. OR Press the ARROW DOWN key on the keyboard (if you have connected one). 3. Press from the unit’s keypad or ENTER on your keyboard to confirm your choice. Note: The touchscreen becomes effective at this point. 4.
Troubleshooting Restoring Your Unit to Normal Operation 5. Tap Next to start the disk analysis. Once the analysis is complete, you can view a report on each drive by tapping Details. 6. Tap OK once you have finished. 7. To exit the integrity analysis tool, tap Cancel to return to the main window.
Troubleshooting Contacting the Technical Support Group Contacting the Technical Support Group To obtain after-sales service or technical support for this product, contact EXFO at one of the following numbers. The Technical Support Group is available to take your calls from Monday to Friday, 8:00 a.m. to 7:00 p.m. (Eastern Time in North America). Technical Support Group 400 Godin Avenue Quebec (Quebec) G1M 2K2 CANADA 1 866 683-0155 (USA and Canada) Tel.: 1 418 683-5498 Fax: 1 418 683-9224 support@exfo.
13 Warranty General Information EXFO Inc. (EXFO) warrants this equipment against defects in material and workmanship for a period of one year from the date of original shipment. EXFO also warrants that this equipment will meet applicable specifications under normal use.
Warranty Liability Liability EXFO shall not be liable for damages resulting from the use of the product, nor shall be responsible for any failure in the performance of other items to which the product is connected or the operation of any system of which the product may be a part. EXFO shall not be liable for damages resulting from improper usage or unauthorized modification of the product, its accompanying accessories and software.
Warranty Exclusions Exclusions EXFO reserves the right to make changes in the design or construction of any of its products at any time without incurring obligation to make any changes whatsoever on units purchased. Accessories, including but not limited to fuses, pilot lamps, batteries and universal interfaces (EUI) used with EXFO products are not covered by this warranty.
Warranty Service and Repairs Service and Repairs EXFO commits to providing product service and repair for five years following the date of purchase. To send any equipment for service or repair: 1. Call one of EXFO’s authorized service centers (see EXFO Service Centers Worldwide on page 215). Support personnel will determine if the equipment requires service, repair, or calibration. 2.
Warranty EXFO Service Centers Worldwide EXFO Service Centers Worldwide If your product requires servicing, contact your nearest authorized service center. EXFO Headquarters Service Center 400 Godin Avenue Quebec (Quebec) G1M 2K2 CANADA EXFO Europe Service Center Winchester House, School Lane Chandlers Ford, Hampshire S053 4DG ENGLAND EXFO Telecom Equipment (Shenzhen) Ltd. 3rd Floor, Building 10, Yu Sheng Industrial Park (Gu Shu Crossing), No.
A Technical Specifications IMPORTANT The following technical specifications can change without notice. The information presented in this section is provided as a reference only. To obtain this product’s most recent technical specifications, visit the EXFO Web site at www.exfo.com. TECHNICAL SPECIFICATIONS GENERAL SPECIFICATIONS Display Touchscreen, color, 800 x 480 TFT, 178 mm (7 in) Size (H x W x D) Interfaces Two USB 2.
Technical Specifications PM-1 BUILT-IN POWER METER SPECIFICATIONS d Calibrated wavelengths (nm) 850, 1300, 1310, 1490, 1550, 1625, 1650 Optional CWDM calibrated wavelengths (nm) 1270, 1290, 1310, 1330, 1350, 1370, 1390, 1410, 1430, 1450, 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610, 1383, 1625 Power range (dBm) 10 to —86 (InGaAs) 26 to —64 (GeX) Uncertainty (%) e ±5 % ± 3 pW (InGaAs) ±5 % ± 0.4 nW (GeX) Display resolution (dB) InGaAs GeX 0.01 = max to —76 dBm 0.
Index Index 3G USB modem, using .............................. 106 A AC requirements ......................................... 16 accessing Internet with a 3G USB modem ........... 106 power meter........................................ 117 adapter ....................................................... 15 after-sales service ...................................... 210 application, starting .................................... 47 B battery charge status ....................................... 183 clock ..
Index F M fiber inspection probe ............................... 119 file format ................................................. 180 name ................................................... 180 FIP ............................................................. 119 Flash Player, installing ............................... 102 folders, removing ...................................... 143 front panel, cleaning ................................. 181 maintenance battery ........................................
Index protective cap ........................................... 182 purchased options....................................... 42 R radiation hazard, laser................................. 13 reading Flash files...................................... 102 removing a module ..................................... 19 repairing unit .............................................. 14 replacing or removing battery ................... 188 restoring system partition ......................... 202 retrieving data ......
NOTICE 抩⛙ CHINESE REGULATION ON RESTRICTION OF HAZARDOUS SUBSTANCES ₼⦌␂ℝ☀⹂䓸德棟Ⓟ䤓屓⸩ NAMES AND CONTENTS OF THE TOXIC OR HAZARDOUS SUBSTANCES OR ELEMENTS CONTAINED IN THIS EXFO PRODUCT ▔⚺⦷㦻 EXFO ℶ❐₼䤓㦘㹡㦘⹂䓸德㒥⏒侯䤓⚜䱿✛⚺摞 O X Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363-2006 嫷䯉年㦘㹡㦘⹂䓸德⦷年捷ↅ㓏㦘⧖德㧟㠨₼䤓⚺摞⧖⦷ SJ/T11363-2006 㪖屓⸩䤓 棟摞尐㻑ⅴₚᇭ Indicates that this toxic or hazardous substance contained in at least one of the
MARKING REQUIREMENTS 㪖㽷尐㻑 Product Environmental protection use period (years) Logo ℶ❐ 䘾⬒≬㔳∎䞷㦮棟 ( ) 㪖㉦ This Exfo product 㦻 EXFO ℶ❐ Batterya 䟄㻯 a a. If applicable.
P/N: 1065710 www.EXFO.com · info@exfo.com CORPORATE HEADQUARTERS 400 Godin Avenue Quebec (Quebec) G1M 2K2 CANADA Tel.: 1 418 683-0211 · Fax: 1 418 683-2170 EXFO AMERICA 3400 Waterview Parkway Suite 100 Richardson, TX 75080 USA Tel.: 1 972-761-927 · Fax: 1 972-761-9067 EXFO EUROPE Winchester House, School Lane Chandlers Ford, Hampshire S053 4DG ENGLAND Tel.: +44 2380 246 800 · Fax: +44 2380 246 801 EXFO ASIA-PACIFIC 100 Beach Road, #25-01/03 Shaw Tower SINGAPORE 189702 Tel.
