Owner's manual

Using the Optional Power Meters and VFL

18 Power Meter and VFL

Opening Result Files

You can open results files that are stored on your unit or on a USB memory

key. If you need more flexibility and a greater choice of report types, you

can also transfer results files to a computer onto which EXFO’s

FastRepo rter is installed.

To open results files:

1. From the button bar, tap Open.

2. If necessary, change the location from which the file should be

opened. The application will keep in memory the last selected folder.

3. From the given list of files, select the file to open.

4. Confirm with OK.

If you have already performed power measurements, but not saved

them, the application will prompt you to save your work. You must

either save or discard the unsaved measurements before being able to

open a file.

5. To view the reopened file, go to the Measurements tab. The power or

insertion loss measurements are displayed on the results list.

IMPORTANT

The file that you will open includes the threshold values and job

information that you had set when you saved that file. These

settings will replace the current settings.