Owner's manual

Using the Optional Power Meters and VFL

Power Meter and VFL 19

Clearing Measurements from the Display

When measurements do not meet your requirements, you can clear the

display and start over.

Note: Clearing measurements from the display does not delete them from the

disk (if they were saved previously).

To clear power measurements:

1. From the button bar, tap Close.

From the Measurements tab, tap Clear All.

If you have not saved the measurements already, the application will

warn you that you will lose your work if you continue.

2. When the application prompts you, proceed as follows:

 Select Yes if you want to discard your measurements.

 Select No if you want to keep them, and then, from the button bar,

tap Save.