Owner's manual

Using the Optional Power Meters and VFL
20 Power Meter and VFL
Adding Information to Your Results
Adding Information to Your Results
A report is available to keep notes on the measurements, the location of
the tested fiber, the type of job performed, and general comments. This
information will be saved, along with your measurements, in the power
meter results file. When you open the results files with applications such as
EXFO’s FastReporter (installed on a computer), all the information that you
entered will be available.
To speed up information entry, once you have provided the required data,
the contents is kept in memory. This information will be used for all new
results.
To add information to your results:
1. From the button bar, tap Setup, and then select the Job Information
tab.
2. Enter information in the appropriate boxes.
3. Tap OK to confirm.
The information that you have entered will be copied to all the new files
(and reports) that you create.