User guide

SCPI Command Reference
108 IQS-2600B
Product-Specific Commands—Description
Response(s) StopWavelength:
The response data syntax for <StopWavelength>
is defined as a <NR3 NUMERIC RESPONSE
DATA> element.
The <StopWavelength> response indicates the
sweep stop wavelength. This value is returned in
meters or in Hz, depending on the selected unit.
To select the unit, use the UNIT[1..n]:SPECtrum
command.
Example(s) UNIT:SPEC M
SOUR:WAV:SWE:STOP 192.000 THZ
SOUR:WAV:SWE:STOP? returns 1.561419E-006
See Also SOURce[1..n]:WAVelength:SWEep:STOP
SOURce[1..n]:WAVelength:SWEep:STARt
UNIT[1..n]:SPECtrum
:SOURce[1..n]:WAVelength:SWEep:
STOP?