User guide

SCPI Command Reference
112 IQS-2600B
Product-Specific Commands—Description
:SOURce[1..n]:WAVelength:SWEep:
STATe
Description This function starts or stops the sweep program.
The sweep program makes the optical
wavelength sweep from a start wavelength to a
stop wavelength, as specified in the sweep
parameters.
At *RST, the sweep state in off.
Syntax :SOURce[1..n]:WAVelength:SWEep:STATe<wsp
><State>
Parameter(s) State:
The program data syntax for <State> is defined
as a <Boolean Program Data> element. The
<State> special forms ON and OFF are accepted
on input for increased readability. ON
corresponds to 1 and OFF corresponds to 0.
The <State> parameter is a value representing
the state of the sweep program.