User guide

SCPI Command Reference
82 IQS-2600B
Product-Specific Commands—Description
:SOURce[1..n]:POWer:STATe
Description This command turns the optical source on or off.
When source is on, the red LED (Active) on the
front of the module lights up.
At *RST, the power state is off.
Syntax :SOURce[1..n]:POWer:STATe<wsp><PowerStat
e>
Parameter(s) PowerState:
The program data syntax for <PowerState> is
defined as a <Boolean Program Data> element.
The <PowerState> special forms ON and OFF
are accepted on input for increased readability.
ON corresponds to 1 and OFF corresponds to 0.
The <PowerState> parameter is the new power
state of the source.
Example(s) SOUR:POW:STAT OFF
See Also SOURce[1..n]:POWer:STATe?