User guide

SCPI Command Reference
92 IQS-2600B
Product-Specific Commands—Description
:SOURce[1..n]:WAVelength:SWEep:
CYCLe
Description This command specifies the number of cycles
you want the sweep program to perform.
At *RST, the sweep cycle is set to 1.
Syntax :SOURce[1..n]:WAVelength:SWEep:CYCLe<wsp
><Cycle>|MAXimum|MINimum|DEFault
Parameter(s) Cycle:
The program data syntax for <Cycle> is defined
as a <numeric_value> element. The <Cycle>
special forms MINimum, MAXimum and DEFault
are accepted on input.
MINimum allows to set the instrument to the
smallest supported value.
MAXimum allows to set the instrument to the
greatest supported value.
DEFault allows the instrument to select a value
for the <Cycle> parameter.
The <Cycle> parameter is the new number of
cycles for the sweep program.