Instruction Manual

Analyzing Traces and Events

140 MAX-700

Modifying Events

Note: This function is available in Advanced mode only.

You can change the loss and reflectance of almost any existing event

except:

 continuous fiber

 end of analysis

 launch level

 merged events

 span start

 span end

In the case of a reflective event, you can also specify whether the event

corresponds to an echo, a possible echo, or no echo.

Note: If you want to modify the attenuation value of a fiber section, see Changing

the Attenuation of Fiber Sections on page 150.

IMPORTANT

If you reanalyze a trace, all of the modified events will be lost and

the events table will be re-created.