Instruction Manual

Analyzing Traces and Events

144 MAX-700

Inserting Events

You can insert events in the event table manually.

This could be useful, for example, if you know that there is a splice at a

given location, but the analysis does not detect it because it is hidden in the

noise or because the splice loss is lower than the minimum detection

threshold (see Setting Pass/Fail Thresholds on page 70).

You can add this event to the events table manually. This will add a number

on the trace at the location of the insertion, but it will not modify the trace.

To insert an event:

1. From the Events tab, press Add New Event.

2. Select the location where you want to insert an event.

IMPORTANT

Inserted events are removed when you reanalyze a trace.