Instruction Manual

Analyzing Traces and Events

150 MAX-700

Changing the Attenuation of Fiber Sections

Note: This function is available in Advanced mode only.

You can change the attenuation value of fiber sections.

Note: If you want to modify events, see Modifying Events on page 140.

To modify the attenuation of a fiber section:

1. From the event table, select the fiber section.

2. Press the Change Event button.

The A and B markers appear in the trace display.

IMPORTANT

If you reanalyze a trace, all of the modifications made to the fiber

sections will be lost and the events table will be re-created.