Instruction Manual

Setting Up Your Unit
228 MAX-700
Configuring the Power Management Options
The table below indicates the default values that are included in each of
the predefined power schemes.
Note: The Turn off hard disks setting is not taken into account (not applicable).
You can either modify one of the existing power schemes or create one
(based on an existing power scheme).
Power Scheme Action
When AC is
connected
Running on
batteries
Standard
(selected by
default)
Turn off monitor Never After 5 minutes
System standby Never After 15 minutes
Always On Turn off monitor Never Never
System standby Never Never
Max Battery Turn off monitor After 15 minutes After 5 minutes
System standby After 30 minutes After 15 minutes
CAUTION
Your unit has been designed to manage power as well as battery
alarms automatically. Never modify the parameters that appear on
the Alarms tab. Doing so WILL prevent the unit from working
properly.