Instruction Manual

Accessing Your Unit Remotely
288 MAX-700
Working With TightVNC
Working With TightVNC
The control of your unit with TightVNC requires the TightVNC Server
(already installed on your unit) and the TightVNC Client Viewer (that you
must install on your computer).
The first time you start the TightVNC Server on your unit, the application
will prompt you to define passwords. Once these passwords are defined,
you are now ready to connect to your unit using the TightVNC Client (on
your computer).
If you want TightVNC Server to start automatically when you turn on your
unit, see Configuring TightVNC Server to Start Automatically on page 294.
IMPORTANT
The passwords that you set for the application that is started
automatically are independent of the passwords that you set for
the application that you start manually (via the Utilities tab). This
means that you could need to enter different passwords,
depending on which TightVNC application you use to connect to
your unit.
If you do not want to manage two different sets of passwords, you
can set all passwords to the same value.