Instruction Manual

Troubleshooting

324 MAX-700

Restoring Your Unit to Normal Operation

Your MAX-700 is set to start using the standard Windows startup sequence.

However, you can also use the emergency system tools feature if you need

to:

 check the disk integrity

 back up some files directly onto a USB storage device for recovery

purposes

 revert your unit to its initial state (as it was when you purchased it) or

restore it with a specific Windows image (WIM) that could have been

provided to you by EXFO customer service, for example.

IMPORTANT

The restoration of the system partition cannot be undone or

stopped once it is started.

If you have installed other products that are not included in your

image file, you will have to reinstall them afterwards.

To avoid loosing the data that is stored on the D drive, you may

want to back it up before restoring the system partition. Otherwise,

all your files will be lost.

IMPORTANT

Connect a keyboard to your unit before using the emergency

system tools. Otherwise, you will not be able to enter the

Maintenance and recovery mode. The touchscreen becomes

available once you have entered the tool.

You may find useful to connect a mouse to your unit as well.