User's Manual

18
How to Mount the Heat Alarm
Drywall
Plastic Anchors
Mounting Bracket
1” Screws
Situation B: No Wood
If no wood is present, use a Phillips
screwdriver to screw the two plastic
wall anchors into the pre-drilled holes
until fully seated. Then secure the
mounting bracket to the wall anchors
using the two 1” screws.
Situation C: Combination
Where there is no wood present, first
screw the plastic wall anchor into
the pre-drilled hole using a Phillips
screwdriver.
Then secure the mounting bracket in
place using the two 1” screws.
Drywall
Plastic Anchors
Mounting Bracket
1” Screws
Wood
4 Lock Into Place
With the batteries installed and the
alarms fully networked together,
position the smoke alarm onto
the center of the bracket and turn
clockwise. The alarm will lock into place.
Heat Manual 06_02_13.indd 18Heat Manual 06_02_13.indd 18 8/5/2013 12:49:21 PM8/5/2013 12:49:21 PM