Contents Precautions .....................................2 Selecting multi-angle views ..........26 Safety Information......................... 3 Title menu function ...................... 26 Disc Notes .................................... 4 Setup .............................................27 Installation .................................... 5 General Setup ............................27 Detaching the control panel ........... 7 Speaker Setup ...........................
Precautions THANK YOU FOR PURCHASING THIS CAR DVD PLAYER . Before operating the unit, read this manual thoroughly and keep it handy for future reference . To avoid injury or accident , read the following precautions before installing and operating the unit . ON INSTALLATION DO NOT install any receiver in locations where; - it may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic accident.
Safety Information CAUTION: THIS DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DVD PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE . HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE DVD PLAYER CORRECTLY AS INSTRUCTED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
Disc Notes Disc formats supported by this player DVD Audio and Video Disc size 12 cm VCD Audio and Video Disc size 12 cm CD Audio Disc size 12 cm MP3 Audio Disc size 12 cm unusable) depending on your handle it and conditions in the usage environment. Note these scratches are not an indication of any problem with the player.
Installation NOTES: Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
Installation DASH BOARD HEX NUT METAL MOUNTING STRAP SPRING WASHER CONSOLE PLAIN WASHER SLIDE BRACKET HOUSING TAPPING SCREW HEX BOLT KEY PLATE PLASTIC COVER KEY PLATE If you want to take CHASSIS out of the SLIDE BRACKET HOUSING, first remove the PLASTIC COVER of the both sides away, then insert the two KEY PLATE into left and right side of chassis as above illustration.
Installation How To Remove And Install The Front Panel When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching The Front Panel Before detaching the control panel, be sure to turn off the power. 1). Press the release button and the left hand side of the front panel will release. (FIG. 1) 2). Pull-off the front panel (FIG. 2) and keep the front panel into the case (FIG. 3) Attaching The Front Panel 1).
Panel Angle Adjustment CHANGING THE CONTROL PANEL ANGLE When you want to change the viewing angle of the operating unit to play, you can touch the section on the screen (or press the (angle)button) repeatedly to select the desired angle as follows: Angle 1 Angle 2 Angle 4 Angle 3 Caution: Do not insert your finger behind the control panel.
Electric Connection WIRING CONNECTION MAIN UNIT WHITE GREEN TV ANT IN REARVIEW CAMERA TRIGGER WIRE (B+) EMERGENCY BRAKE SAFTY WIRE (B-) REARVIEW CAMERA INPUT RCA CABLE ANTENNA CONNECTOR SUBWOOFER OUTPUT (GREY) VIDEO OUTPUT 2 (YELLOW) COAXIAL OUTPUT ( BROWN) REAR RCA OUTPUT IGNITION SWITCH(B+) RED MEMORY YELLOW BACK-UP(B+) CHOKE BOX FRONT RCA OUTPUT GROUND(B-) RED/ RCH WHITE/LCH BLACK FRONT RCA OUTPUT (RED/R) VIDEO OUTPUT 1 (YELLOW) FRONT RCA OUTPUT (WHITE /L) AUTO ANTENNA FUSE BLUE FRONT
Remote Control DVD/RECEIVER CONTROL 15 POWER 17 7 2 13 24 18 10 20 MENU MODE 4 11. VOL+/VOL12. / / / 13.MENU SUB WOOFER 14.BAND(OSD) 15.POWER 16.PLAY/PAUSE 17.MUTE 18.TITLE/PBC (A/P) 19. 20.ANGLE 21.EQ 22.SEARCH 23.ENTER 24.SKIP EQ CLK 5 1 21 23 OSD ENTER BAND 9 TITLE/PBC VOL TOP VOL RDM 12 INT 2 3 4 5 6 SEL 7 8 9 SETUP GOTO +10 0 8 10.SEL 16 3 1 7.REPEAT 8.GOTO 9. / MO/ST A/PS 11 6. SUBTITLE LO/DX STOP ANGLE LO/DX 6 1.CLK 2.MODE 3.STOP 4.SETUP 5.
Remote Control Preparing the Remote Control Inserting the Batteries 1.First push to inside as the direction indicated by the arrow (See 1 )And then Remove the battery holder as the direction indicated by the arrow (See 2 ). 2.Replace the battery Set a new battery property with (+)side up as illustrated (See 3 ). 3.Insert the battery holder. Push in the holder to the original position(See 4 ).
Control Panel Key Functions Touch Panel AUX IN LUD SWF LUD SWF DSP VOLUME- 1 POP CLK SEL CH 1-6 MOD VOLUME+ 15 11 13 3 14 REL 10 11:08 IR MU RET VOL- EQ 8 6 SEL 12 4 A PS I DIS P VOL+ MOD BND TOUCH SCREEN 5 AUX IN CAR DVD/VCD/CD/MP3/MPEG4/TV PLAYER 9 16 18 17 7 2 Touch Screen Key : 1. SWF : subwoofer function 2. LUD : louder function 3. DSP : EQ function 4.CLK : clock function 5. : mute function 6.MOD : select input mode . 7.Volume+ : volume adjustment (+) 8.
Control Panel Unit Keys : 1 15 11 13 3 14 REL 10 IR MU RET CH 1-6 VOL- EQ 8 6 SEL 12 4 A PS I DIS P VOL+ MOD BND TOUCH SCREEN 5 AUX IN CAR DVD/VCD/CD/MP3/MPEG4/TV PLAYER 9 16 18 17 7 2 1.REL BUTTON Press this button to release the front panel for removal . Refer to see page 7. 2. (POWER On/Off) BUTTON Press it to switch the device ON, press it again to switch the device OFF . 3.VOL+/ VOL- knob In normal mode, this knob is used to increase or decrease the volume.
Control Panel 6. EQ BUTTON Swing the SEL knob briefly in the EQ direction to turn to equalization function and to select desired audio mode. There are five kinds of mode as below: JAZZ CLAS POP ROCK FLAT 7. APS, DISPLAY FUNCTIONS (using the SELECT knob) Scan Function In Radio mode, swing the SEL knob briefly in the APS/DISP direction , the radio briefly plays all the preset stations of the frequency band .
Control Panel 11. / BUTTONS (TUNE, SEEK, TRACK, SKIP UP/DOWN) a) In DISC, USB mode: if you wish to jump forwards or backwards press the SEL button (4) briefly in the or direction. (Note: in DVD mode, press the SEL button continually twice in direction to skip back one track during playback.) Note:For some VCD 2.0 dics(PBC-playback control), and buttons may be unavailable. To wind through the tracks keep the SEL button pressed in the or direction for about 2 seconds. FF X2 appears in the display.
Basic Operation Touch screen POWER On/Off Press it to switch the device ON, press and hold about 2 seconds to switch the device OFF. Ejecting The Disc Use your singer touch the range on touch screen , the control panel of the unit will swing downwards . Then you can insert the disc or eject the disc . (You can also press the button on the front panel to eject the disc or insert the disc to start play . ) VOLUME+ Touch the screen the VOLUME+ to increase the volume level .
Basic Operation Rear View Camera TFT Monitor Adjustment When connecting the rear view camera. the mirror image of the rear view through the rear view camera is automatically displayed on the monitor when you change the gear to the back position. (The monitor on the unit only.
Basic Operation Balance: R 0-10 to L 0-10 . Adjust sound balance between left and right speakers by using VOL + / - . Fader: F 0 - 10 to R 0 -10 . Adjust sound balance between front and rear speakers by using VOL + / VOL - . A. Initial installation of the unit when all wiring is completed. B. All the function buttons do not operate. C. Error symbol on the display.
Radio Operation Listening to the Radio Selecting The Frequency Band Switching To Radio Mode Touch the MOD range repeatedly on the touch screen to select the RADIO mode. (You can also press repeatedly the / MOD button to select the RADIO .) the following information will appears on the display : MOD FM1 ST 106.
Radio Operation Automatic Memory Storing & Program Scanning To tune in strong-singnal FM Station only (LO/DX function) Automatic Preset Setup Touch the LOC section on the touch screen (or press LO/DX button on the remote) to select the LOCAL or DX mode . ( You can choose between the LOCAL and DX(DISTANCE) mode for local or long-distance traffic news . ) LOC Touch it to select the other item, it will display the following as below : FM1 Storing Stations In Memory ST Setting Memory SWF LUD FM1 106.
DISC Operation Basic Operation DVD During the DISC playback, use the finger touch the touch screen , it display will following as bellow : 11-0:44:36 RPT DISC IN LUD SUBTITLE AUDIO 11:08AM SET TITLE GOTO DVD POP SWF 11-0:44:36 RPT DISC IN LUD POP SWF 11:08AM MOD SEL VOL- 1 2 Touch it to select the other item . VOL+ 3 4 5 DVD 11-0:44:36 6 MOD 12 VOL- SEL VOL+ 11 10 9 1.Previous 2.Next 3.Pause 4.Stop 5.Mute 6.Mode ENT 8 7 Above these operation buttons for DVD setup.
DISC Operation Switching the DVD mode MOD Skipping Track During DISC playback, Touch the section on the touch screen to skip to next track. (You can also swing the SEL knob in direction to skip to next track.) Touch the MOD section on the touch screen (or press MOD button ) to select the DISC mode, it display like following : DVD LUD During DISC playback, Touch the section on the touch screen to skip to back one track .( You can also swing the SEL knob in direction to back one track .
DISC Operation 2). RDM(RANDOM) Function Selecting The Play Modes During DISC playback, Touch the RDM section ( press the 4/RDM button longer on remote control to play in random. Each playing, the order is different . (depend on the disc used for VCD). Touch it again to cancel this function . RDM During the Disc playback, touch the touch screen, it will display the following as below : DVD 11-0:44:36 RPT DISC IN LUD POP SWF 11:08AM 3).
DISC Operation Note: Touch and hold the 7/ / 9/ section on the touch screen , you can select the title or chapter of DVD . (Only for the DVD with title /chapter.) DISC Search (GOTO) DVD 11-0:44:36 RPT DISC IN LUD POP SWF SUBTITLE AUDIO AUX Operation SET TITLE GOTO GOTO 11:08AM To connect analogue replay devices. Use this jack to replay sound of other replay equipment such as DVD players, computers, etc. Via the loudspeakers.
DISC Operation ON-SCREEN DISPLAY FUNCTION OSD During playback, touch the screen the OSD section (or press the OSD on the remote), it will display the following as below : 2.Example for VCD/SVCD/CD: A.Touch or Press OSD for first time: SINGLE ELAPSED TRACK 01/16 0:00:56 1. DVD: A.Touch or Press OSD for first time: B.
DISC Special Functions For VCD/CD: during playback, touch the AUDIO section of the touch screen or Press AUDIO on the remote . It is possible to switch the sound between monaural and stereo sound. DVD/VCD Special Function DVD 11-0:44:36 RPT LUD DISC IN SWF POP MONO LEFT 11:08AM MONO RIGHT MIX-MONO STEREO SUBTITLE GOTO AUDIO SET TITLE 3. Multi-Angle Function (for DVD Only) During DVD playback, touch the section or Press ANGLE button on the remote .
Setup USING THE MENU GENERAL SETUP TV Setting DOLBY DOLBY ....GENERAL SETUP PAGE.... ....GENERAL SETUP PAGE.... TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memor y TV Display Display TV Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memor y LB ON ENG SPDIF/RAW ON ON ON Go To General Setup Page Nor mal/PS Nor mal/LB Wide Set TV Display Mode 1. Touch the SET section of DVD setup on touch screen (or press the SETUP on the remote .) 2.
Setup GENERAL SETUP DOLBY DOLBY ....GENERAL SETUP PAGE.... ....GENERAL SETUP PAGE.... TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memor y TV Display Angle Mark OSD OSD Lang Lang Spdif Output Captions Screen Saver Last Memor y ON OFF Set Angle Mark SPDIF SPDIF/OFF OFF SPDIF/RAW SPDIF/PCM Setup SPDIF 2.
Setup SPEAKER SETUP GENERAL SETUP .....Speaker Setup Page..... DOLBY DOLBY ....GENERAL SETUP PAGE.... ....Speaker Setup Page.... TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memor y DOWNMIX LT/RT STEREO ON OFF Screen Saver Set Downmix Mode This is to activate the audio output from DOLBY AC3 5.1 DOWNMIX to 2 channel mode. Select the preferred SPEAKER connection by using the cursor buttons. Select the LT/RT to activate the Dolby surround compatible output.
Setup --- PREFERENCES PAGE --DOLBY DOLBY ....Preference Page.... ....Preference Page.... TV Type Audio OSD Lang Subtitle Disc Menu Parental Password Default TV Type Audio OSD Lang Subtitle PAL AUTO Disc Menu Parental Password Default NTSC English French Ger man Spanish Italian Por tuguese Off Set TV Standard Prefer red Subtitle Language 1.TV TYPE SETUP 3.SUBTITLE LANGUAGE SETUP This player can play discs recorded in either PAL or NTSC format.Select NTSC format, when you connected to NTSC TV.
Setup --- PREFERENCES PAGE --Age control DOLBY DOLBY ....Preference Page.... ....Preference Page.... TV Type Audio OSD Lang Subtitle Disc Menu Parental Password Default TV Type Audio OSD Lang Subtitle 4PG13 5PGR 6R 7NC 17 8ADULT OFF Disc Menu Parental Password Default Set Parental Control RESET Load Factor y Setting 5.PARENTAL 7.DEFAULTS Select suitable parental guidance by the cursor buttons and conformed by pressing ENTER button. Select reset to become factory initial setting.
Other Main Operation USB Operation (17) Following the diagram below, connect your USB device to the front panel USB port . If it is properly connected, the device will be mounted and start playing automatically. If the disc present in the player is an DVD or VCD or CD disc, touch on the screen or press STOP twice on the remote then touch GOTO section on the screen or press the GOTO button on the remote to USB playback.
Other Main Operation Touch it to select the other item . TV Note: In TV mode, the +10 button is not available. Fine Tuning 001 FINE+ DISC IN LUD 1 0 6 POP SWF 2 7 11:08AM 3 8 9 FINE- 5 4 Touch the “fine+/fine- ” section on the touch screen (or press / button on the remote) to fine tune the current channel .
Other Main Operation MP3/WMA/JPEG/MPEG4 DISC PLAY 1.When inserting an MP3/WMA/JPEG/MPEG4 disc. Ex: When MP3 file is detected. 5 4 3 00:56 2 003/112 1 1 .Current track(file)(highlighted bar) 2 .Current track (file) number/total 6 Repeat one 04:07 3 4 Mp3 K Mp3 woman 1 Mp3 new ton P 5 ....... ....... 6 number of tracks(files) in the current folder. .Elapsed playing time of the current track( not available for JPEG disc) .total playing time. ( not available for JPEG disc) .
Specification Supply Voltage: Current Consumption: Signal System: Discs Played: 12V DC (11V-15V) Less than10 A Compositive video 1.0Vp-p 75 (1)DVD-VIDEO Disc 5"(12 cm) single-sided, single-layer 5"(12 cm) single-sided, double-layer (2)Compact Disc (CD-DA, VIDEO CD) 5"(12cm) disc Audio Signal Output: Characteristics: 2ch&4ch line out (1)Frequency Response (2)S/N Ratio (3)Wow and Flutter RADIO Section: Frequency Coverage: IF: Sensitivity (S/N = 20 dB): For 3 Bands (Europe) FM 87.5 to108 MHz 10.
Trouble Shooting Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. SYMPTOM No power CAUSE SOLUTION The car ignition switch is not on The fuse is blown If the power supply is properly connected to the car accessory terminal,switch the ignition key to "ACC" Replace the fuse Presence of disc inside the Remove the disc in the player, then put a new one player.
