Contents Precautions ................................... 2 Selecting Subtitles ..........................26 Safety Information......................... 3 Selecting multi-angle views .............. 26 Disc Notes .................................... 4 Title menu function .......................... 26 Installation .................................... 5 Setup .............................................27 Detaching the control panel .............. 7 General Setup ................................
Precautions THANK YOU FOR PURCHASING THIS CAR DVD PLAYER . Before operating the unit, read this manual thoroughly and keep it handy for future reference . To avoid injury or accident , read the following precautions before installing and operating the unit . ON INSTALLATION DO NOT install any receiver in locations where; - it may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic accident.
Safety Information CAUTION: THIS DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DVD PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE . HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE DVD PLAYER CORRECTLY AS INSTRUCTED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
Disc Notes Disc formats supported by this player DVD Audio and Video Disc size 12 cm VCD Audio and Video Disc size 12 cm CD Audio Disc size 12 cm MP3 Audio Disc size 12 cm Discs which cannot be played with this player DVD-RAM CDV CDG Handling and Cleaning Dirt, dust, scratches and warping disc will cause misoperation. Do not place stickers or make scratches on discs. Do not warp discs. A disc should always be kept in its case when not in use to prevent from damaging.
Installation NOTES: 1. Choose the mounting location where the unit will not interfere with the normal driving function of the driver. 2. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. 3. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. 4.
Installation 3. Remove the PLASTIC COVER of the both sides away PLASTIC COVER 4. Insert the two KEY PLAT into the grooves at both sides of the unit as shown in figure until they click . KEY PLATE 5. Pulling the levers makes it possible to remove the unit from the dashboard .
Installation How To Remove And Install The Front Panel When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching The Front Panel Before detaching the control panel, be sure to turn off the power. 1). Press the “REL” release button and the left hand side of front panel will release. RELEASE BUTTON 2). Pull-off the front panel and keep the front panel into the case .
Panel Angle Adjustment CHANGING THE CONTROL PANEL ANGLE When you want to change the viewing angle of the operating unit to play, you can touch the section on touch screen (or press the button on the front panel) repeatedly to select the desired angle as follows: ANGLE 1 - ANGLE 2 - ANGLE 3 - ANGEL 4 - ANGLE 1 . ANGLE 1 ANGLE 2 ANGLE 4 ANGLE 3 Caution: Do not insert your finger behind the control panel.
Electric Connection WIRING CONNECTION AUX INPUT AUDIO INPUT (R-CH/RED) REAR AUX OUTPUT VIDEO INPUT (YELLOW) AUDIO OUTPUT (L-CH/WHITE) AUDIO INPUT (L-CH/WHITE) AUDIO OUTPUT (R-CH/RED) FRONT AUX OUTPUT AUX OUTPUT SUBWOOFER OUTPUT (GREY) AUDIO OUTPUT (R-CH/RED) VIDEO OUTPUT 2 (YELLOW) VIDEO OUTPUT 1 (YELLOW) COAXIAL OUTPUT ( BROWN) AUDIO OUTPUT (L-CH/WHITE) RADIO ANTENNA JACK IGNITION SWITCH(B+) MEMORY BACK-UP(B+) GROUND(B-) BROWN RED YELLOW REARVIEW CAMERA TRIGGER WIRE (B+) ORANGE CHOKE BO
Remote Control DVD/RECEIVER CONTROL 15 MODE 17 7 2 MUTE PLAY/PAUSE 3 REDIAL ANGLE MO/ST 19 13 22 16 STOP 20 PAIR 1 LOUD MENU EQ CLK 21 LO/DX 6 23 OSD 14 24 18 BAND 9 ENTER TITLE/PBC A/PS TOP RPT INT 1 2 3 4 5 6 SEL 7 8 9 SETUP GOTO +10 0 VOL 11 10 4 VOL 1 2 3 4 5 12 RDM 8 Ref # Button 5 27 26 25 Function Press it briefly to view the clock time , Press again to return to normal display mode . Press longer to set the time .
Remote Control Ref # Button 8 GOTO 9 / 10 SEL 11 VOL+/- 12 / / / 13 14 15 Function Press it button to begin playback at a moment in the program you designate. Use number buttons to enter the data that is needed. In Bluetooth menu, it serves as the button on your mobile handset. Press these buttons to skip ahead or back one track.
Remote Control Function Ref # Button 23 ENTER This button is used to confirm selections and settings within many of the menus in the OSD system. In DISC mode, press it to reverse rapidly 24 25 0-9 These buttons are used for numeric entry in many different menus. 26 +10/ This button is used with the other number buttons for use with two-digit number entries. In Bluetooth menu, it serves as the button on your mobile handset.
Control Panel Key Functions Touch Panel IR AUX IN SEL BND MUTE REL MODE MUTE ON - CH 1-6 VOL + PAIR REDIAL DIAL MIC MOD RES VOLUME- SEL VOLUME+ Touch Screen Key : Changing the viewing angle of the operating unit MODE MUTE ON REDIAL VOLUME- Operating mode selection Redialling Decrease the volume level To switch of the sound SEL Select the menu of the Picture/Sound Loading and ejecting the DVD/CD VOLUME+ Increase the volume level PAIR Registering devices with one another DIAL
Control Panel Unit Keys : 10 11 IR AUX IN 12 13 14 SEL BND MUTE REL - 15 MIC 16 17 1 CH 1-6 VOL + MOD 9 8 7 6 5 4 3 2 1 RES (POWER On/Off )/MODE BUTTON Press this button to switch the device on. WELCOME appears in the display. Press it again to switch the device off. SEE YOU appears in the display. In playback mode, you can use the button to select the input mode by pressing repeatedly until the proper one is found : DISC > AUX IN > RADIO > BLUETOOTH MP3 .
Control Panel Normal Playback 2x 4x 8x 16x DVD/VCD/CD/MP3: B) In Radio Mode: Press briefly the or button in order to set a radio station manually. press longer (for more than 2’s ) the or button in order to start the search for a radio station automatically. 6 MUTE BUTTON Press this button briefly to select the MUTE or NOT . 7 BAND BUTTON In Radio mode, press it repeatedly to select the desired radio band: FM1, FM2, FM3, AM1(MW1), AM2(MW2) .
Basic Operation Mute Function POWER On/Off Press it to switch the device ON, press and hold about 2 seconds to switch the device OFF. MUTE ON Touch “MUTE ON” range, it will mute the sound but the disc continues playing . Touch it again to resume . Ejecting The Disc Use your finger to touch the range on touch screen , the control panel of the unit will swing downwards . Then you can insert the disc or eject the disc .
Basic Operation Rear View Camera TFT Monitor Adjustment When connecting the rear view camera. the mirror image of the rear view through the rear view camera is automatically displayed on the monitor when you change the gear to the back position. (The monitor on the unit only.
Basic Operation Balance: R 0-10 to L 0-10 . Adjust sound balance between left and right speakers by using VOL + / - . Fader: F 0 - 10 to R 0 -10 . Adjust sound balance between front and rear speakers by using VOL + / VOL - . The RESET button is to be activated for the following reasons: A. Initial installation of the unit when all wiring is completed. B. All the function buttons do not operate. C. Error symbol on the display.
Radio Operation Listening to the Radio Selecting The Frequency Band Touch the screen of “ BND ” section (or press the BND on the front panel ) repeatedly to select the band , the message will show in turn : BND Switching To Radio Mode Touch the screen of “MODE” range (or press the MOD button on the front panel ) repeatedly to select the RADIO mode. the following information will appears as below: MODE FM1 FM2 AM2(MW2) FLAT FM3 AM1(MW1) 12:04 NO-DISC ST FM1 DX 87.
Radio Operation Automatic Memory Storing & Program Scanning To tune in strong-singnal FM Station only (LO/DX function) Touch the “ LOC ” section on the touch screen (or press LO/DX button on the remote control ) to select the LOCAL or DX mode . ( You can choose between the LOCAL and DX(DISTANCE) mode for local or long-distance traffic news .
DISC Operation Basic Operation Switching the DVD mode During DISC playback, you can touch the screen to display the following: Touch the screen of “MODE” range (or press MOD button on the front panel ) to select the DISC mode, it display like following : FLAT 12: 16 DISC-IN DVD FLAT 1-0:00:16 MODE 12: 16 DISC-IN MUTE ON DVD 1-0:00:16 MODE VOLUME- SEL VOLUME+ VOLUME- FLAT MUTE ON SEL VOLUME+ 12: 16 DISC-IN DVD 1-0:00:16 PAIR DIAL AUDIO REDIAL SUBTITLE OSD ZOOM Stopping Play TIT
DISC Operation Selecting The Play Modes Skipping Track During DISC playback, Touch the / section on the touch screen to skip to next/back one track. (You can also press the / on the front panel to skip to next /back one track.) During the Disc playback, touch the touch screen, it will display the following as below : FLAT 12: 16 DISC-IN DVD 1-0:00:16 RANDOM REPEAT S-WOOFER LOUDNESS INTRO Note : 1. In DVD mode, touch the section continually twice to back one track .
DISC Operation Each playing, the order is different . (Depend on the disc used for VCD). Touch it again to cancel this function . Note : in random mode, the button is not available . DISC Search (GOTO) FLAT DISC-IN DVD 3). INT Function RANDOM REPEAT S-WOOFER LOUDNESS INTRO CLOCK GOTO Touch to select FLAT 12:16 DISC-IN DVD 1-0:00:16 GOTO FOR VCD : Touch the screen of the “INTRO” section (or long er press the 3/INT button on the the remote control ).
DISC Operation Note: Touch and hold the / section on the touch screen , you can select the title or chapter of DVD . (Only for the DVD with title /chapter.) FLAT 12: 16 DISC-IN AUX 1 IN AUX Operation This unit features AUX IN line input jacks on both the front (headphone type) and rear (RCA type ) panel . follow the diagram below t o connect analogue replay devices. Use this jack to replay sound of other replay equipment such as DVD players, computers, etc. Via the loudspeakers.
DISC Operation ON-SCREEN DISPLAY FUNCTION OSD During playback, touch the screen the OSD section (or press the OSD on the remote), it will display the following as below : 2.Example for VCD/SVCD/CD: A.Touch or Press OSD for first time: SINGLE ELAPSED TRACK 01/16 0:00:56 1. DVD: A.Touch or Press OSD for first time: B.
DISC Special Functions DVD/VCD Special Function FLAT For VCD/CD: during playback, touch the AUDIO section of the touch screen or Press AUDIO on the remote . It is possible to switch the sound between monaural and stereo sound. 12: 16 DISC-IN POP PAIR AUDIO OSD DIAL REDIAL SUBTITLE DSP MONO LEFT MONO RIGHT MIX-MONO STEREO ZOOM TITLE 3. Multi-Angle Function (for DVD Only) Touch to select 1. Multi-subtitle Language Function (for DVD Only) During DVD playback.
Setup USING THE MENU GENERAL SETUP TV Setting DOLBY DOLBY ....GENERAL SETUP PAGE.... TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memor y ....GENERAL SETUP PAGE.... LB ON ENG SPDIF/RAW ON ON ON TV Display Display TV Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memor y Nor mal/PS Nor mal/LB Wide Go To General Setup Page Set TV Display Mode 1. Touch the screen of “ SETUP ” range or press the SETUP button on remote . 2.The SETUP menu is displayed. 3.
Setup GENERAL SETUP DOLBY DOLBY ....GENERAL SETUP PAGE.... ....GENERAL SETUP PAGE.... TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memor y TV Display Angle Mark OSD OSD Lang Lang Spdif Output Captions Screen Saver Last Memor y ON OFF SPDIF/OFF SPDIF/RAW SPDIF/PCM Setup SPDIF Set Angle Mark 2. ANGLE MARK DISPLAY SETUP If it is set to ON, when the multi-angle DVD disc is playing, (the angle mark) will appears on the screen; if is set to OFF, the mark will not appear. 4.
Setup GENERAL SETUP SPEAKER SETUP .....Speaker Setup Page..... DOLBY DOLBY ....GENERAL SETUP PAGE.... TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memor y ....Speaker Setup Page.... ON OFF Screen Saver Set Downmix Mode 6.SCREENSAVER SETUP If the screen displays a static image for too long, some "burn-in" may occur, leaving a permanent trace of the image behind. To avoid this, turn ON the SCREENSAVER item.
Setup --- PREFERENCES PAGE --DOLBY DOLBY ....Preference Page.... ....Preference Page.... TV Type Audio OSD Lang Subtitle Disc Menu Parental Password Default TV Type Audio OSD Lang Subtitle Disc Menu Parental Password Default PAL AUTO NTSC Set TV Standard English French Ger man Spanish Italian Por tuguese Off Prefer red Subtitle Language 1. TV TYPE SETUP This player is capable of playing discs recorded in either PAL or NTSC formats.
Setup --- PREFERENCES PAGE --Age control DOLBY DOLBY ....Preference Page.... ....Preference Page.... TV Type Audio OSD Lang Subtitle Disc Menu Parental Password Default TV Type Audio OSD Lang Subtitle 4PG13 5PGR 6R 7NC 17 8ADULT OFF Disc Menu Parental Password Default Set Parental Control RESET Load Factor y Setting 5.PARENTAL 7.
Bluetooth Operation Bluetooth Car Kit User Manual 1. “Pair”To Your Bluetooth Phone Prior to using the Car Kit for the fist time, you must pair it with a Bluetooth-enabled mobile handset. The following steps describes pairing the instruction for a typical Bluetoothenabled mobile handset. Touch the touch screen , the touch operation menu will display.
Bluetooth Operation Adjust the Volume DIAL ” section , Touch the screen of “ the message will display as below : During conversation in progress, tune the Volume switch until you reach the desired volume level. DIAL NUMBERS 1 2 3 4 5 6 7 8 9 0 Play BT music touch to dial CLEAR In Bluetooth menu, touch the screen of “MODE” range to select the “BT MUSIC” , you can play the BT MUSIC from your mobile handset.
Other Main Operation USB Operation Following the diagram below, connect your USB device to the front panel USB port . If it is properly connected, the device will be mounted and start playing automatically. Changing From DISC to USB Playback Modes If the disc present in the player is an MP3 disc, touch section on screen or press the STOP on remote once then touch or press the GOTO to USB playback.
Other Main Operation SD/MMC card OPERATION The unit can support playback MP3/WMA/JPEG/MP4 and Divx format which are stored into SD and MMC memory card . Please read below before you start the operation of memory card . Inserting and removing a SD or MMC card on the front panel of unit . Inserting the SD or MMC card . Label side facing backward Insert the memory card into slot with label side facing backward . Press in till heard a “CLICK” . Removing the SD or MMC card . Remove the memory card .
Other Main Operation MP3/WMA/JPEG/MPEG4 DISC PLAY When you insert a disc which contains MP3, WMA or JPEG files, the different file types are detected, and a list of the files are produced, as shown in the diagram below. 5 4 3 00:56 2 003/112 1 04:07 Mp3 K Mp3 woman 1 Mp3 new ton 6 Repeat one P ....... ....... 1 Current track(file)(highlighted bar) 2 Current track (file) number/total number of tracks(files) in the current folder.
Specification Supply Voltage: Current Consumption: Signal System: Discs Played: 12V DC (11V-15V) Less than10 A Compositive video 1.
Trouble Shooting Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. SYMPTOM No power CAUSE SOLUTION The car ignition switch is not on The fuse is blown If the power supply is properly connected to the car accessory terminal,switch the ignition key to "ACC" Replace the fuse Presence of disc inside the Remove the disc in the player, then put a new one player.