Content Precaution...................................... 2 Digital Video Special Function....... 23 Safety Information......................... 3 Multi-subtitle language function........ 23 Disc Note....................................... 4 Multi-audio language function........... 23 Installation .................................... 5 Multi-angle function......................... 23 P anel angle adjustment ................. 7 Title menu function .......................... 23 Electric Connection ..
Precaution THANK YOU FOR PURCHASING THIS CAR DIGITAL VIDEO PLAYER . Before operating the unit, read this manual thoroughly and keep it handy for future reference . To avoid injury or accident , read the following precautions before installing and operating the unit . ON INSTALLATION DO NOT install any receiver in locations where; - it may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic accident.
Safety Information CAUTION: THIS DIGITAL VIDEO PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DIGITAL VIDEO PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE . HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE DIGITAL VIDEO PLAYER CORRECTLY AS INSTRUCTED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
Disc Note Disc formats supported by this player Digital Video Digital Video Audio and Video Disc size 12 cm VCD VCD Audio and Video Disc size 12 cm CD CD Audio Disc size 12 cm MP3 MP3 Audio Disc size 12 cm Discs which cannot be played with this player Digital Video-RAM CDV CDG Handling and Cleaning Dirt, dust, scratches and warping disc will cause misoperation. Do not place stickers or make scratches on discs. Do not warp discs.
Installation NOTES: 1. Choose the mounting location where the unit will not interfere with the normal driving function of the driver. 2. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. 3. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. 4.
Installation DASH BOARD HEX NUT METAL MOUNTING STRAP SPRING WASHER PLAIN WASHER CONSOLE TAPPING SCREW HEX BOLT MOUNTING BRACKET MOUNTING BOLTS MOUNTING BRACKET NOTE: Don`t attempt install the set by yourself, it should be installed by professional installer .
Panel Angle Adjustment CHANGING THE CONTROL PANEL ANGLE When you want to change the viewing angle of the operating unit to play, you can touch the section on touch screen (or press the button on the front panel) repeatedly to select the desired angle as follows: ANGLE 1 - ANGLE 2 - ANGLE 3 - ANGLE 4 - ANGLE 1 . Angle 2 Angle 1 Angle 4 Angle 3 Caution: Do not insert your finger behind the control panel.
Electric Connection WIRING CONNECTION REAR RCA OUTPUT CABLE RCH RED SUBWOOFER GREY LCH WHITE RCH IN RED AUX INPUT FRONT RCA OUTPUT CABLE FRONT RCA RED R VIDEO OUT YELLOW VIDEO IN YELLOW FRONT RCA WHITE L LCH IN WHITE RADIO ANTENNA JACK IGNITION SWITCH(B+) MEMORY BACK-UP(B+) GROUND(B-) BROWN RED YELLOW ORANGE FUSE BOX YELLOW BLACK REAR VIEW CAMERA TRIGGER WIRE(B+) (B-)PARKING BRAKE REAR VIEW CAMERA INPUT FUSE AUTO ANTENNA BLUE FRONT Lch SPK. REAR Lch SPK.
Remote Control 15 POWER 17 7 2 MUTE PLAY/PAUSE 16 STOP 3 REPEAT ANGLE MO/ST ZOOM 19 13 22 20 MENU MODE EQ 1 CLK 21 LO/DX 6 23 OSD 14 24 18 BAND 9 ENTER TITLE/PBC A/PS VOL TOP VOL RDM 1 11 10 4 12 INT 2 3 4 5 6 SEL 7 8 9 SETUP GOTO +10 0 8 Ref # Button 5 27 26 25 Function 1 CLOCK Press it briefly to view the clock time . 2 MODE 3 STOP Press repeatedly to cycle through the various modes: > RADIO > DISC > USB > CARD > AUX 1 IN > AUX2 IN > .
Remote Control Ref # Button 8 GOTO 9 / Function Press it button to begin playback at a moment in the program you designate. Use number buttons to enter the data that is needed. Press these buttons to skip ahead or back one track.
Remote Control Function Ref # Button 23 ENTER This button is used to confirm selections and settings within many of the menus in the OSD system. In DISC mode, press it to reverse rapidly 24 25 0-9 Use to input numerical values during programming, with the GOTO button, or to directly select a track to play . 26 +10 This button is used with the other number buttons for use with two-digit number entries.
Basic Operation TFT Monitor Adjustment In media mode , touch screen of “ ” range to enter the main menu .
Basic Operation SETTING WALLPAPER ADJUSTABLE ITEMS: in wallpaper mode, you can select the among of “ AUTO, GREEN, Y ELLOW , R ED , TREBLE: - 7 to + 7 Adjust treble level . LIGHT B LUE , B LUE , P INK ” . When you select the “AUTO” item, the player will change the background automatically . BASS: - 7 to + 7 Adjust bass level . BALANCE: R 0-10 to L 0-10 Adjust sound balance between left and right speakers . Rear View Camera When connecting the rear view camera.
Basic Operation SETTING TIME NOTE: If RESET is selected, all memory data will deleted, please re-adjust . In SETTING mode, touch the “TIME” range to select the time mode . SET ALTERNATE AUDIO SOURCE HOUR On the front panel of the unit , there is an AUX IN jack, to connect analogue replay devices. Use this jack to replay sound of other replay equipment such as media players, computers, etc. Via the loudspeakers. 1).
Control Panel Unit Keys : SEL USB IN 1 1 MOD 2 VOL- CH1-6 3 VOL+ MU AUX IN Right side View Front View RET IR 4 5 6 7 8 9 10 11 12 USB PORT For information about connecting a USB device, please see page 33. 2 (POWER On/Off )/MODE BUTTON Press this button to switch the device on. WELCOME appears in the display. Press it again to switch the device off. SEE YOU appears in the display.
Control Panel -Store in Memory > Select the frequency band > Press repeatedly the button to select the desired memory key . > Select the station > Keep the desired memory key pressed in until the station is heard again after a brief interruption . The operation as below: -Retrieve a preset station press the button repeatedly to retrieve a station which had been stored in the memory in advance the chose number is shown on display .
Touch Screen Operation (9) Touch to change the frequency band . RADIO Operation Listening to radio Press repeatedly the MOD button on the front panel to select the RADIO mode . (You can enter the main menu to select the RADIO mode ) Touch Screen Configuration (1) (2) 87.50 Radio (3) FM1 MHZ APS DX ST (13) (12) 1 87.50 2 90.00 (4) (10) Touch to start manual search the radio station. Touch longer to start search the radio station automatically . (11) Touch : recalling the preset station.
Touch Screen Operation Start Searching For a Station Manual Search During Radio mode, briefly touch the screen of “ ” section to increase frequency by one step of channel spacing . Briefly touch the “ ” section to decrease frequency by one step of channel spacing . Automatic Search During Radio mode, touch and hold (for more than 2’s ) the screen of “ / ” section to start search for a radio station automatically .
Touch Screen Operation MEDIA OPERATION To skip the previous track In any modes, press the MODE button on the front panel to enter the media play mode . The message will display as below : (When Parking Brake supplied .) To search the disc with numbers In Digital Video mode, touch to the root menu. In VCD mode, touch to switch the PBC ON and PBC OFF.
Touch Screen Operation BASIC OPERATION Note: when the JPEG disc playback, in normal mode, you can use the cursor buttons to rotate the picture . Press UP to invert an image . Press DOWN to mirror an image . Press LEFT to rotate an image to left . Press RIGHT to rotate an image to right . Stopping Play Touch the screen the range to stop the unit playback. touch the range to start play.
Touch Screen Operation FOR VCD : Touch the screen of the “INT” section (or longer press the 3/INT button on the the remote control ). It display will following menu as below : SEQ PLAY INTRO function RANDOM function INRO 1 DISC Search (GOTO) Note: when select the INRO Mode, this player to start to play the previous 10 seconds part of each track/chapter on disc. (Touch it again to cancel this mode .
Touch Screen Operation ON-SCREEN DISPLAY FUNCTION OSD During playback, touch the screen of the OSD section, it will display the following as below : 1. Digital Video: A.Touch or Press OSD for first time: 2.Example for VCD/SVCD/CD: A.Touch or Press OSD for first time: VCD TRK 1/19 A PBC C 0:01:36 B.Touch or Press OSD for second time: VCD TRK 1/19 A PBC C -0:06:06 Digital Video TT 01/01CH 04/31 C 0:02:06 C.
Touch Screen Operation D igital Video Special Function 1. Multi-subtitle Language Function (for Digital Video Only) 3. Multi-Angle Function (for Digital Video Only) During Digital Video playback. Touch the SUBTITLE section on touch screen(or press the SUBTITLE on the remote) . Each time the button is pressed or touch, number of the subtitle language changes in sequential order. During Digital Video playback, touch the ANGLE button on the touch screen.
Touch Screen Operation MEDIA SETUP MENU SYSTEM SETUP USING THE MENU SYSTEM SETUP TV SYSTEM SCREEN SAVER TV TYPE PASSWORD RATING DEFAULT SYSTEM SETUP TV SYSTEM SCREEN SAVER TV TYPE PASSWORD RATING DEFAULT EXIT EXIT 1. Touch the screen of “ ” range or press the SETUP button on remote . 2.The SETUP menu is displayed. 3.Touch directly the desired item to select the preferred item . Or by using the / / / buttons . 4.
Touch Screen Operation SYSTEM SETUP TV SYSTEM SCREEN SAVER TV TYPE PASSWORD RATING DEFAULT SYSTEM SETUP TV SYSTEM SCREEN SAVER TV TYPE PASSWORD RATING DEFAULT 4:3PS 4:3LB 16:9 EXIT 16:9 ----- EXIT 4:3 Letter Box 4:3 Pan Scan TV DISPLAY SETUP This is to select the appropriate TV aspect (4:3 or 16:9) according to the connected TV set. Normal/PS (For 4:3 TV) Played back in the PAN & SCAN style. (If connected to wide-screen TV, the left and right edges are cut off.
Touch Screen Operation SYSTEM SETUP LANGUAGE SETUP ENGLISH GERMAN SPANISH FRENCH PORTUGUESE ITALIAN RUSSIAN OSD LANGUAGE AUDIO LANG SUBTITLE LANG MENU LANG TV SYSTEM SCREEN SAVER TV TYPE PASSWORD RATING DEFAULT RESTORE EXIT EXIT DEFAULTS Selecting the DEFAULT item and confirming RESTORE will return ALL personal settings you have made, including radio and TV presets, to the factory default settings.
Touch Screen Operation VIDEO SETUP LANGUAGE SETUP OSD LANGUAGE AUDIO LANG SUBTITLE LANG MENU LANG ENGLISH GERMAN SPANISH FRENCH PORTUGUESE ITALIAN RUSSIAN BRIGHTNESS CONTRAST HUE SATURATION SHARPNESS 12 10 8 6 4 2 0 EXIT EXIT MEDIA MENU LANGUAGE SETUP Select the preferred MEDIA MENU language by touching directly the desired language . CONTRAST- the contrast of the video signal (the dark portions of pictures).
Touch Screen Operation DIGITAL SETUP VIDEO SETUP BRIGHTNESS CONTRAST HUE SATURATION SHARPNESS 12 10 8 6 4 2 0 DIGITAL SETUP DYNAMIC RANGE FULL 6/8 4/8 2/8 OFF EXIT EXIT SATURATION- the saturation of the video signal (the vividness of the color) all above can be adjusted to your tasters . DYNAMIC RANGE CONTROL Select DRC and adjust the dynamic range of a Dolby Digital encoded program. There are 8 steps between full compression and off compression.
Touch Screen Operation Front AUX Input Operation To return to the main menu On the front panel of this unit, there is an AUX IN jack, follow the diagram below to connect analogue replay devices(only for the Audio connect, if you want to connect the Video, please plug the RCA
Touch Screen Operation USB Operation Following the diagram below, connect your USB device to the front panel USB port . If it is properly connected, the device will be mounted and start playing automatically. Changing From DISC to USB Playback Modes If the disc present in the player is an Digital Video or VCD or MP3/WMA or MP4 disc, touch the screen of the “ ” range to enter the home menu, then touch the “USB” ICON to enter the USB mode .
Touch Screen Operation SD/MMC CARD OPERATION The unit can support playback MP3/WMA/JPEG/MP4 and Divx format which are stored into SD and MMC memory card . Please read below before you start the operation of memory card . Inserting the SD or MMC card . Label side facing downward Eject Insert the memory card into slot with label side facing downward . Press in till heard a “CLICK” . Press (Eject) button to slide down the front panel Removing the SD or MMC card . Press in till heard a “CLICK” .
Touch Screen Operation MP3/WMA/JPEG/MPEG4 PLAY The unit is support MP3/WMA/JPEG/MPEG4 . When a disc is inserted into player, the following picture will appear on the monitor . The unit will play the first track automatically . You can touch to directly others mode (MP3/JPEG /MPEG4) to play . EX. : when the MP3 mode is selected . 2 [MP3] ITLE / SONG: 1 Current type (highlighted bar) . TRACK 03 2 Current track ( ID3 TAG display ) . 001 WMA 1 / 002 Mp3 003 3 The current play mode(MP3).
Specification Generall : Supply Voltage: Current Consumption: Signal System: Discs Played: 12V DC (11V-15V) Less than10 A Compositive video 1.
Trouble s hooting Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. SYMPTOM No power CAUSE SOLUTION The car ignition switch is not on The fuse is blown If the power supply is properly connected to the car accessory terminal,switch the ignition key to "ACC" Replace the fuse Presence of disc inside the Remove the disc in the player, then put a new one player.
